Jonsered GC2236 manual Starting and Stopping, Check before starting, Starting and stopping

Page 17

STARTING AND STOPPING

Check before starting

•Check the blade to ensure that no cracks have formed at the bottom of the teeth or by the centre hole. The most common reason why cracks are formed is that sharp corners have been formed at the bottom of the teeth while sharpening or that the blade has been used with dull teeth. Discard a blade if cracks are found.

•Check that the support flange is not cracked due to fatigue or due to being tightened too much. Discard the support flange if it is cracked.

•Ensure the locking nut has not lost its captive force. The nut lock should have a locking force of at least 1.5 Nm. The tightening torque of the locking nut should be 35-50 Nm.

•Check that the blade guard is not damaged or cracked. Replace the blade guard if it is exposed to impact or is cracked.

•Check that the trimmer head and trimmer guard are not damaged or cracked. Replace the trimmer head or

trimmer guard if they have been exposed to impact or are cracked.

•Never use the machine without a guard nor with a defective guard.

•All covers must be correctly fitted and undamaged before you start the machine.

Starting and stopping

WARNING! The complete clutch cover

!and shaft must be fitted before the machine is started, otherwise the clutch can come loose and cause personal injury.

Always move the machine away from the refuelling area before starting. Place the machine on a flat surface. Ensure the cutting attachment cannot come into contact with any object.

Make sure no unauthorised persons are in the working area, otherwise there is a risk of serious personal injury.The safety distance is 15 metres.

Starting

Primer bulb: Press the air purge repeatedly until fuel begins to fill the bulb. The bulb need not be completely filled.

English – 17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents GC2236 Operator′s manual English Symbols KEY to SymbolsOperator of the machine must Ensure, while working, that no Persons or animals come closer thanContents Dear Customer IntroductionWhat is what on the brushcutter? What is WHAT?Personal protective equipment General Safety PrecautionsThrottle lockout Machine′s safety equipmentVibration damping system Stop switchCutting attachment guard Muffler Cutting equipment Cutting equipmentLocking nut General rules Sharpening grass cutters and grass bladesTrimmer head Assembling the cutting equipment AssemblyFitting the J-handle Fitting a blade guard, grass blade and grass cutter Fitting the guard extensionFitting other guards and cutting attachments Fuel Fuel safetyFuel Handling Mixing FuellingCheck before starting Starting and StoppingStarting and stopping StartingStarter cord around your hand StoppingGeneral working instructions Basic safety rulesWorking Techniques Basic working techniques Grass clearing using a grass bladeGrass trimming with a trimmer head TrimmingSweeping CuttingCarburettor MaintenanceCorrectly adjusted carburettor Fine adjustment of the idle speed TLow speed jet L High speed jet HCooling system MufflerBevel gear Remember the risk of fireAir filter Cleaning the air filterSpark plug Oiling the air filterMaintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataEC-declaration of conformity Approved accessories Type Cutting attachment guard, Art. noApplies to Europe only EN ISO 12100-2, Cispr 122005, EN ISOPoly Trim S35 2,7mm 095-.106 25 m 15 cm Tap n’ Go 35 Spin Tap n’Go 45 Spin Page Page 1151216-26

GC2236 specifications

The Jonsered GC2236 is a robust and versatile garden tractor designed for homeowners seeking efficient performance in lawn maintenance. With a focus on durability, ease of use, and advanced technology, this machine has garnered attention among gardening enthusiasts and professionals alike.

At the heart of the Jonsered GC2236 is a powerful engine featuring a reliable Briggs & Stratton design. This engine provides ample horsepower to tackle a variety of tasks, from mowing to towing, ensuring that you can maintain your lawn or garden with ease. The engine is paired with a rugged transmission that offers smooth speed variations, allowing users to adapt their pace according to the terrain and requirements of the task at hand.

One of the standout features of the GC2236 is its cutting system. It comes equipped with a 36-inch cutting deck that delivers a clean and even cut, enhancing the overall appearance of your lawn. The cutting height is easily adjustable, making it simple for users to customize their mowing experience based on grass length and conditions. The deck design allows for efficient grass collection, reducing the need for subsequent raking or clean-up.

Comfort is a key consideration in the design of the Jonsered GC2236. The tractor features a spacious, ergonomically designed seat that ensures a comfortable riding experience during extended periods of use. Additionally, the easy-to-use controls and intuitive dashboard contribute to user-friendly operation, making it accessible for gardeners of all skill levels.

Technological advancements are also integrated into this model. The GC2236 is designed with enhanced maneuverability, allowing operators to navigate tight spaces and obstacles with confidence. Its tight turning radius helps make trimming around flower beds and trees much simpler. Furthermore, the tractor's sturdy build quality and durable components ensure that it can withstand the rigors of regular use.

For those who appreciate convenience, the Jonsered GC2236 offers practical features such as a spacious cargo area for transporting tools and equipment. Its towing capacity allows users to attach trailers or other accessories, expanding its functionality beyond just mowing.

In conclusion, the Jonsered GC2236 is a standout garden tractor that combines performance, comfort, and technology to provide an exceptional gardening experience. Whether tackling large lawns or intricate landscaping, this garden tractor is a reliable choice for anyone looking to maintain their outdoor space efficiently.
Top Page Image Contents