Jonsered GC 2125C manual Fitting other guards and cutting attachments

Page 13

ASSEMBLY

•Insert a finger into the centre hole of the cover (I) while grasping the cover with your other fingers. Using the index finger and thumb of your other hand, release the two catches (J) that engage in the cut-outs in the bottom half

(K). Pull apart the trimmer head, grasping the cover firmly.

•Place the cover (I) and the support flange (F) on the output shaft.

•Fit the nut (G). The nut must be tightened to a torque of 35-50 Nm (3.5-5 kpm). Use the socket spanner in the tool kit. Hold the shaft of the spanner as close to the blade guard as possible. To tighten the nut, turn the spanner in the opposite direction to the direction of rotation (Caution! left-hand thread).

•Fit the bottom half of the trimmer head (K) to the cover (I) by pressing them together, with the cut-outs on the bottom half aligned with the catches on the cover.

•To dismantle, follow the instructions in the reverse order.

Fitting the blade guard/combination guard, grass blade and grass cutter

(GC 2125, GC 2125C)

•Hook the blade guard/combination guard (A) onto the fitting on the shaft and secure with the bolt. CAUTION! Use the recommended blade guard. See the Technical data section.

G

F

E

D

B

AC

•Fit the drive disc (B) on the output shaft.

•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.

•Insert the locking pin (C) in the hole to lock the shaft.

•Place the blade (D), support cup (E) and support flange

(F) on the output shaft.

•Fit the nut (G). The nut must be tightened to a torque of 35-50 Nm (3.5-5 kpm). Use the socket spanner in the tool kit. Hold the shaft of the spanner as close to the blade guard as possible. To tighten the nut, turn the spanner in the opposite direction to the direction of rotation (Caution! left-hand thread).

Fitting other guards and cutting attachments

(GC 2125, GC 2125C)

•Fit the correct trimmer guard (A) for use with the trimmer head. Hook the trimmer guard/combination guard onto the fitting on the shaft and secure with the bolt (L).

•Fit the drive disc (B) on the output shaft.

•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.

•Insert the locking pin (C) in the hole to lock the shaft.

•Screw on the trimmer head/plastic blades (H) in the opposite direction to the direction of rotation.

H

H

•To dismantle, follow the instructions in the reverse order.

English – 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Operator’s manual EPA Symbols KEY to SymbolsContents Dear customer IntroductionWhat is what? What is WHAT?GC2125C Personal protective equipment General Safety PrecautionsStop switch Machine′s safety equipmentThrottle lockout Vibration damping system Cutting attachment guardMuffler Locking nut Cutting equipmentCutting equipment Trimmer head Sharpening grass cutters and grass bladesFitting the loop handle AssemblyFitting the J-handle Assembling and dismantling the two-piece shaft AssemblyAssembling the cutting equipment Fitting the trimmer guard and Auto 32 trimmer headFitting other guards and cutting attachments Guard Fitting the trimmer guard and trimmer headFuel Handling Fuel safetyFuel Mixing FuelingCheck before starting Starting and StoppingStarting and stopping StartingStopping Working Techniques Basic safety rulesGeneral working instructions Basic working techniquesGrass trimming with a trimmer head Grass clearing using a grass bladeSweeping Carburetor MaintenanceCorrectly adjusted carburetor Fine adjustment of the idle speed TMuffler High speed jet HCooling system Cleaning the air filterAir filter Spark plugBevel gear Two-piece shaftMaintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataPowerhead model Accessories Art No Your Warranty Rights and Obligations Federal Emission Control Warranty StatementTap-N-Go Trimmy H S35 095-.106 ´z+R3¶5y¨ Auto 1150271-95 ´z+R3¶5y¨ ´z+R3¶5y¨

GC 2125, GC 2125C specifications

The Jonsered GC 2125C and GC 2125 are exceptional gardening tools engineered to meet the diverse needs of both professionals and hobbyists in lawn care and garden maintenance. These two models stand out for their reliability, versatility, and performance, making them popular choices among garden enthusiasts.

One of the main features of the Jonsered GC 2125C and GC 2125 is their powerful engine. Equipped with high-performance two-stroke engines, these models deliver outstanding power and durability, ensuring efficient operation for a variety of tasks, from lawn mowing to trimming overgrown areas. The engines are designed for low fuel consumption and reduced emissions, making them environmentally friendly options.

Both models present a user-friendly design that prioritizes comfort and ease of use. The ergonomic handle provides a comfortable grip and minimizes vibration, allowing for extended use without causing fatigue. The adjustable handle height accommodates users of different sizes, ensuring that everyone can work comfortably.

One key technological advancement incorporated into the Jonsered GC 2125C and GC 2125 is the Smart Start feature. This technology makes starting the engine a straightforward process, requiring less effort from the user. With a simple pull of the starter cord, the engine fires up quickly, which is especially beneficial for those who may struggle with traditional starting mechanisms.

The cutting system in both models features a durable and efficient blade design, coupled with adjustable cutting heights. This adaptability makes it easy to achieve a clean and precise cut, whether tackling thick grass or delicate flowers. The GC 2125C comes with added functionalities, offering users versatility in trimming and mowing with its innovative cutting deck.

Maintenance is made simple with both models; Jonsered prioritizes easy access to crucial engine components, allowing for quick checks and repairs. This commitment to user-friendly maintenance extends to the air filter and spark plug, which can be reached without specialized tools.

In summary, the Jonsered GC 2125C and GC 2125 are robust gardening tools that combine powerful performance, user-centric design, and innovative technologies. Whether used by professionals or gardening enthusiasts, these models excel at delivering efficient, reliable, and environmentally conscious performance for all outdoor maintenance needs.
Top Page Image Contents