Jonsered GC 2125C manual Starting and Stopping, Check before starting, Starting and stopping

Page 17

STARTING AND STOPPING

Check before starting

•Check the blade to ensure that no cracks have formed at the bottom of the teeth or by the centre hole. The most common reason why cracks are formed is that sharp corners have been formed at the bottom of the teeth while sharpening or that the blade has been used with dull teeth. Discard a blade if cracks are found.

•Check that the support flange is not cracked due to fatigue or due to being tightened too much. Discard the support flange if it is cracked.

•Ensure the locking nut has not lost its captive force. The nut lock should have a locking force of at least 1.5 Nm. The tightening torque of the locking nut should be 35-50 Nm.

•Check that the blade guard is not damaged or cracked. Replace the blade guard if it is exposed to impact or is cracked.

•Check that the trimmer head and trimmer guard are not damaged or cracked. Replace the trimmer head or trimmer guard if they have been exposed to impact or are cracked.

•Never use the machine without a guard nor with a defective guard.

•All covers must be correctly fitted and undamaged before you start the machine.

Starting and stopping

WARNING! The complete clutch cover and

!shaft must be fitted before the machine is started, otherwise the clutch can come loose and cause personal injury.

Always move the machine away from the refuelling area before starting. Place the machine on a flat surface. Ensure the cutting attachment cannot come into contact with any object.

Make sure no unauthorised persons are in the working area, otherwise there is a risk of serious personal injury. The safety distance is 15 metres.

Starting

Primer bulb: Press the air purge repeatedly until fuel begins to fill the bulb. The bulb need not be completely filled.

Choke: Set the choke control in the choke position.

WARNING! When the engine is started with

!the choke in either the choke or start throttle positions the cutting attachment will start to rotate immediately.

Hold the body of the machine on the ground using your left hand (CAUTION! Not with your foot!). Grip the starter handle, slowly pull out the cord with your right hand until you feel some resistance (the starter pawls grip), now quickly and powerfully pull the cord. Never wrap the starter cord around your hand

Repeat pulling the cord until the engine starts. When the engine starts. return choke control to run position and apply full throttle; the throttle will automatically disengage from the start setting.

English – 17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Operator’s manual EPA Symbols KEY to SymbolsContents Dear customer IntroductionGC2125C What is WHAT?What is what? Personal protective equipment General Safety PrecautionsThrottle lockout Machine′s safety equipmentStop switch Muffler Cutting attachment guardVibration damping system Cutting equipment Cutting equipmentLocking nut Trimmer head Sharpening grass cutters and grass bladesFitting the J-handle AssemblyFitting the loop handle Assembling and dismantling the two-piece shaft AssemblyAssembling the cutting equipment Fitting the trimmer guard and Auto 32 trimmer headFitting other guards and cutting attachments Guard Fitting the trimmer guard and trimmer headFuel Fuel safetyFuel Handling Mixing FuelingCheck before starting Starting and StoppingStarting and stopping StartingStopping Working Techniques Basic safety rulesGeneral working instructions Basic working techniquesGrass trimming with a trimmer head Grass clearing using a grass bladeSweeping Carburetor MaintenanceCorrectly adjusted carburetor Fine adjustment of the idle speed TMuffler High speed jet HCooling system Cleaning the air filterAir filter Spark plugBevel gear Two-piece shaftMaintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataPowerhead model Accessories Art No Your Warranty Rights and Obligations Federal Emission Control Warranty StatementTap-N-Go Trimmy H S35 095-.106 ´z+R3¶5y¨ Auto 1150271-95 ´z+R3¶5y¨ ´z+R3¶5y¨

GC 2125, GC 2125C specifications

The Jonsered GC 2125C and GC 2125 are exceptional gardening tools engineered to meet the diverse needs of both professionals and hobbyists in lawn care and garden maintenance. These two models stand out for their reliability, versatility, and performance, making them popular choices among garden enthusiasts.

One of the main features of the Jonsered GC 2125C and GC 2125 is their powerful engine. Equipped with high-performance two-stroke engines, these models deliver outstanding power and durability, ensuring efficient operation for a variety of tasks, from lawn mowing to trimming overgrown areas. The engines are designed for low fuel consumption and reduced emissions, making them environmentally friendly options.

Both models present a user-friendly design that prioritizes comfort and ease of use. The ergonomic handle provides a comfortable grip and minimizes vibration, allowing for extended use without causing fatigue. The adjustable handle height accommodates users of different sizes, ensuring that everyone can work comfortably.

One key technological advancement incorporated into the Jonsered GC 2125C and GC 2125 is the Smart Start feature. This technology makes starting the engine a straightforward process, requiring less effort from the user. With a simple pull of the starter cord, the engine fires up quickly, which is especially beneficial for those who may struggle with traditional starting mechanisms.

The cutting system in both models features a durable and efficient blade design, coupled with adjustable cutting heights. This adaptability makes it easy to achieve a clean and precise cut, whether tackling thick grass or delicate flowers. The GC 2125C comes with added functionalities, offering users versatility in trimming and mowing with its innovative cutting deck.

Maintenance is made simple with both models; Jonsered prioritizes easy access to crucial engine components, allowing for quick checks and repairs. This commitment to user-friendly maintenance extends to the air filter and spark plug, which can be reached without specialized tools.

In summary, the Jonsered GC 2125C and GC 2125 are robust gardening tools that combine powerful performance, user-centric design, and innovative technologies. Whether used by professionals or gardening enthusiasts, these models excel at delivering efficient, reliable, and environmentally conscious performance for all outdoor maintenance needs.
Top Page Image Contents