Jonsered CS 2121 EL, CS 2117 EL manual Technical Specifications

ENGLISH

TECHNICAL SPECIFICATIONS

Motor		1700	2000
Rated voltage	VAC	220-240	230
Rated output	W	1700	2000
Frequency	Hz	50/60	50
Slip clutch		Yes	Yes
Electronic start control		-	Yes
Electronic speed control		-	Yes
Electronic overload protection		-	Yes
Weight
Without guide bar and chain	kg	4,4	4,4
With 14” guide bar and chain	kg	5,1	5,1
Chain lubrication
Oil tank volume	litres	0.1	0.1
Oil consumption approx.	litres	0.1/20 min.	0.1/20 min.
Oil pump		auto	auto
Noise levels
Equivalent noise intensity at operator’s ear,
according to international standards	dB(A)	95	95
Noise emissions
Sound power, measured	LW dB(A)	104	104
Sound power, guaranteed	LWA dB(A)	106	106
Vibration
Front handle	m/s2	4.4	4.4
Rear handle	m/s2	5,4	5,4
Chain/guide bar
Recommended bar length	inches/cm	12/30	12/30
	inches/cm	14/35	14/35
	inches/cm	16/40	16/40
Effective cutting length	inches/cm	12/30	12/30
	inches/cm	14/35	14/35
	inches/cm	16/40	16/40
Chain speed, unloaded	m/sec. (drive)	14,5 (6 tooth)	15,2 (6 tooth)
Chain speed, rated output	m/sec. (drive)	12,5 (6 tooth)	12,2 (6 tooth)
Chain pitch	inches	3/8	3/8
Gauge	inches/mm	.050/1.3	.050/1.3
Number of drive links	12”/14”/16”	45/52/56	45/52/56

inch inch/mm inch/mm inch/mm inch/cm/dl

(

4