Jonsered CS 2117 EL, CS 2121 EL manual Contents, EC Declaration of Conformity

CONTENTS

Symbols	2	Slip clutch	11
Important! Read before using chain saw	2	Electronic overload protection 2000W	11
Contents	3	Cutting equipment	11
EC declaration of conformity	3	Chain and guide bar lubrication	12
Technical specifications	4	- Chain oil	12
Chain saw parts	5	- Filling chain oil	12
Safe use	5	- Checking automatic	12
		chain lubrication system
Starting and stopping	7
		- Checking chain wear	12
Daily inspection and maintenance	7
		Filing chain	13
Kickback prevention	8
		Limbing	13
Chain brake with kickback guard	9
		Crosscutting	14
- Kickback guard inspection	9
		Felling operations	14
- Manual chain brake function check	9
		- Danger zone	15
- Inertia chain brake function check	9
		- Felling direction	15
Mounting guide bar and adjusting chain	10
		- Clearing branches/Line of retreat	15
Chain catcher	11
		- Felling	15
Right hand guard	11

ENGLISH

EC DECLARATION OF CONFORMITY

Husqvarna Norge AS, N-1708 Sarpsborg, Norway hereby declares that the following chain saws:

Jonsered CS 2117EL and Jonsered CS 2121EL, with serial numbers starting at 54000001 and onwards,

-are manufactured in compliance with EC Directive 98/37/EC (Machinery), EC Directive 73/23/EEC including amendments (Low Voltage Directive), EC Directive 89/336/EEC including amendments (Electromagnetic Compatibility Directive), and in accordance with annex V of Directive 2000/14/EC (Noise Emission in the environment by equipment for use outdoors)

-are manufactured in compliance with the following harmonized standards: EN 50144-1, EN 50144-2-13, IEC 60745-1 and IEC 60745-2-13.

Notified body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has:

-carried out the EC type examination in accordance with the machinery Directive (98/37/EC) Article 8(2)(c)

-issued EC type examination certificates No. 404/04/1038 - Jonsered CS 2117 EL

and 404/04/1037 - Jonsered CS 2121 EL pursuant to machinery Directive 98/37/EC, Annex IV (4)

The chain saw submitted is identical to the samples submitted for EC type examination.

The measured and guaranteed sound power levels in accordance with Directive 2000/14/EC are set forth under Technical Data in the User’s Manual.

Sarpsborg, 1th of October 2005

--------------------

Jan Hansen, President

3