Jonsered CS 2240 manual 2xA a, Throttle lock, throttle trigger and return spring removal

Safety equipment

6.9Throttle lock, throttle trigger and return spring – removal

1

Loosen the throttle actuator rod on the carburettor, the fuel hose and the suction hose to the fuel pump.

2

Dismantle the tank unit from the engine unit by loosening the screws A (see figure 17)

3

Dismantle the handle insert (B) by loosening the screw C on the handle (see figure 18).

A

	A
Fig 17 A	2xA A

Fig 18

4

Press out the throttle control pin (D) with the help of a punch (see figure 19).

Fig 19

5

Loosen the throttle lock as illustrated with the help of a screwdriver or the like. Then dismantle from the shaft in the handle (see figure 20).

6

Dismantle the throttle control (see figure 20).

7

Now loosen the spring.

Fig 20

Fig 21

22 – English