Jacuzzi SEDONA Temperature Sensor Mounting, Finish Materials, Flange Mounting, Rear Weep Hole

Page 10

Temperature Sensor Mounting

The temperature sensor should be mounted 6" below the ceiling or dome, inside the steam room, but not directly over the steam dispersion head or more than 7 feet above the floor. Using a 7/8" hole saw, drill a hole in the finished wall where the sensor is to be mounted (the sensor cable should already be roughed-in to this location). Locate the sensor cable, pull it out through the hole and plug it into the temperature sensor. It is best to tape the sensor and cable connection together to avoid disconnection inside the wall. Apply silicon caulk as shown in diagram and insert the sensor in the hole. An optional trim ring is included with the sensor. If the 7/8" hole is jagged or is cut too large the trim ring may be used to cover the exposed edges. Make sure that the sensor probe is pointing down once installed. Tape the sensor in place while the silicone hardens.

WALL SILICONE

SEALANT

Finish Materials

Apply tile (or other finishing material) leaving a 1/8" gap between the finishing material and the base flange lip. Seal this gap with silicone sealant. Leave a minimum 1/4" weep hole at the back and front corners of the base . The weep holes are necessary to allow drainage from leakage through unsealed tiled grout.

Filling the area marked DO NOT FILL will prevent moisture from draining back into the base through the weep holes. This moisture is due to leakage through the tile grout. Sealing the tile grout will prevent this leakage.

 

ADHESIVE

CEMENT

TILE

BOARD

 

SILICONE SEALANT

DO NOT

FILL

PIGTAIL

PROBE MUST POINT DOWNWARD

STUD

OPTIONAL

TRIM RING

7/8" HOLE

Flange Mounting

After base is in position secure flange to studs with screws provided. If there is a gap between flange and stud shims MUST be used.

TYPICAL FLANGE MOUNTING DETAIL

FRONT WEEP HOLE

SILICONE

SEALANT

STUD

FLANGE

SHIM IF NECESSARY TO FILL GAPS BETWEEN STUD AND FLANGE

ATTACH WITH SCREWS PROVIDED

1/4" MINIMUM WEEP HOLE

REAR WEEP HOLE

TILE

1/4" MINIMUM

WEEP HOLE

STUD

SILICONE

SEALANT

8

Image 10
Contents Sedona Read ALL Installation Instructions Optional AccessoriesContents Specifications Total Weight Product Dimensions Floor Loading ElectricalFraming and Support Framing and ROUGH-IN DetailsDrain Down Locations Control and Temperature Sensor Cable Rough-in Temperature Sensor Rough-inWater Supply Drain AssemblyBase Drain Electrical ConnectionsController Mounting in Finished Wall Controller MountingFinished Wall Mounting Tile Wall MountingFlange Mounting Temperature Sensor MountingFinish Materials Typical Flange Mounting Detail Front Weep HoleService Access Clean-Up After InstallationOperation of Your Digital Time and Temperature Control Maintenance of the SteamPro UnitOperation Troubleshooting Troubleshooting Wiring Diagram Jacuzzi Whirlpool Bath National Headquarters Amerec Limited Warranty Registration Form Jacuzzi Whirlpool Bath Responsibilities of Others

SEDONA specifications

The Jacuzzi SEDONA is a premium hot tub designed to elevate the relaxation experience with its innovative features and state-of-the-art technology. Known for its ergonomic design and luxurious amenities, the SEDONA combines comfort and performance, making it a popular choice among hot tub enthusiasts.

One of the standout features of the SEDONA is its spacious seating capacity, accommodating up to six adults. The thoughtfully designed lounge and seating arrangements enable users to enjoy varied hydrotherapy experiences, ensuring that every guest finds their ideal spot. With strategically placed jets throughout the tub, the SEDONA targets key muscle groups, providing a soothing massage that eases tension and promotes relaxation.

The hot tub is equipped with the patented Jacuzzi Hydrotherapy jets, which offer customizable settings to adjust the pressure and intensity of the massage. These jets are designed to provide both therapeutic benefits and a gentle spa experience, making them ideal for anyone looking to unwind after a long day. The integrated water filtration system ensures that the water remains clean and clear, enhancing the overall experience.

Another key characteristic of the SEDONA is its advanced control system, which allows users to manage water temperature, jet settings, and lighting with ease. The intuitive control panel is user-friendly, making it simple for anyone to operate. Moreover, the SEDONA features LED mood lighting, enhancing the ambiance for evening soak sessions.

Energy efficiency is also a priority for the SEDONA, with a well-insulated design and energy-efficient pump. This ensures that operating costs are kept low while maintaining a consistently warm water temperature. The hot tub is also crafted with durable materials, ensuring longevity and resistance to the elements.

In terms of aesthetics, the SEDONA is available in various colors and finishes, allowing users to customize it to fit their outdoor decor. Its contemporary design complements any backyard or patio, turning it into a serene escape.

In summary, the Jacuzzi SEDONA offers a perfect blend of comfort, style, and technology. With its spacious seating, advanced jet system, user-friendly controls, and energy-efficient operation, this hot tub is an excellent investment for anyone seeking therapeutic relaxation and outdoor enjoyment. Whether hosting friends or enjoying a quiet soak, the SEDONA delivers an unparalleled spa experience right at home.