Fuzion™ 6666
Whirlpool Bath with chromatherapy
EH20 | Fuzion™ 6666 Whirlpool Bath Teak, Left Hand |
EG90 | Fuzion™ 6666 Whirlpool Bath Teak, Right Hand |
EH25 | Fuzion™ 6666 Whirlpool Bath Wenge, Left Hand |
EG95 | Fuzion™ 6666 Whirlpool Bath Wenge, Right Hand |
Fuzion™ 6666
Whirlpool Bath with illumatherapy™
EH35 | Fuzion™ 6666 Whirlpool Bath Teak, Left Hand |
EH05 Fuzion™ 6666 Whirlpool Bath Teak, Right Hand | |
EH40 | Fuzion™ 6666 Whirlpool Bath Wenge, Left Hand |
EH10 Fuzion™ 6666 Whirlpool Bath Wenge, Right Hand | |
•Center Drain Location
•Overflow fitting comes with tub
•Accessories / Hardware:
HTC Jet Trim Kit: #D095
Oval Trim Kit: #N557
BMH 2 Jet trim Kit: # J869 (2 kits required)
• Trim Kit Finishes Available: (827) – Chrome
(898)– Brushed Chrome
(815)– Satin Nickel
(829)– Bright Brass
(805)– Platinum
(826)– Brushed Nickel
(845)– Oil Rubbed Bronze
40.94" | 40.94" |
69.68" | 66" |
Ref. |
|
66" |
|
20" X 4" | 9.29" |
Motor |
|
Installation Notes
Refer to installation instructions included with fixture before beginning installation. Please confirm product availability and specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Technical Specifications
Dimensions
66" L x 66" W x 223⁄4" H
(1676) mm L x (1676) mm W x (578) mm H
Drain/Overflow
A: 1613⁄16" (427 mm) B: 121⁄8" (308 mm)
Cutout
See Below
Total Weight
TBD
Operating Gallonage
TBD
Product Weight
TBD
Skirt Mounting
Not Available
Electrical Specifications
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 20 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
Heater (Standard)
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N S750000
32.97"37.23"
| 32.97" |
12" H x 18" L | Heater (S) |
| |
Service Access | 46.61" |
Product Shown: Fuzion™ 6666 Whirlpool Bath Teak
with Illumatherapy Left Hand Model: EH35
*Measurements inside unit represent cutout in floor to allow for drain/overflow.
Minimum Service Access dimensions given.
65"
Blower
DRAINMotor
32"
32"
48"
Faucet Installation Note: Selecting a faucet for rim mounting: The combined thickness at the rim of the tub shell and the wood trim is 2" (50,8 mm) nominal. The length of the faucet tailpiece(s) must be long enough to extend past this dimension and have ample clearance to assemble any hardware (i.e. locknut, water supply fittings, etc.) necessary for
L
SIDE VIEW
(159 mm) |
| Cutout |
|
| |
W |
| |
|
| |
H |
| A |
(Motor) | (Heater) | B |
END VIEW | DRAIN/OVERFLOW |
|
installation.
© 2007 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com | #FR44000 10/07 |