Husqvarna 420 GN manual Generator Storage, Long Term Storage Instructions, Storing the Engine

Page 16

Storage

The generator should be started at least once every seven days and allowed to run at least 30 minutes. If this cannot be done and you must store the unit for more than 30 days, use the following guidelines to prepare it for storage.

Generator Storage

•Clean the generator as outlined in Cleaning.

•Check that cooling air slots and openings on generator are open and unobstructed.

Long Term Storage Instructions

Fuel can become stale when stored over 30 days. Stale fuel causes acid and gum deposits to form in the fuel system or on essential carburetor parts. To keep fuel fresh, use Briggs

&Stratton FRESH START™ fuel stabilizer, available as a liquid additive or a drip concentrate cartridge.

There is no need to drain gasoline from the engine if a fuel stabilizer is added according to instructions. Run the engine for 2 minutes to circulate the stabilizer throughout the fuel system. The engine and fuel can then be stored up to

24 months.

If gasoline in the engine has not been treated with a fuel stabilizer, it must be drained into an approved container. Run the engine until it stops from lack of fuel. The use of a fuel stabilizer in the storage container is recommended to maintain freshness.

WARNING

Fuel and its vapors are extremely flammable and explosive.

Fire or explosion can cause severe burns or death.

WHEN STORING FUEL OR EQUIPMENT WITH FUEL IN TANK

•Store away from furnaces, stoves, water heaters, clothes dryers or other appliances that have pilot light or other ignition source because they can ignite fuel vapors.

WHEN DRAINING FUEL

•Turn generator OFF and let it cool at least 2 minutes before removing fuel cap. Loosen cap slowly to relieve pressure in tank.

•Drain fuel tank outdoors.

•Keep fuel away from sparks, open flames, pilot lights, heat, and other ignition sources.

•DO NOT light a cigarette or smoke.

Storing the Engine

See the engine operator’s manual for instructions on how to properly prepare the engine for storage.

Other Storage Tips

1.DO NOT store fuel from one season to another unless it has been treated as described in Long Term Storage Instructions.

2.Replace fuel container if it starts to rust. Rust and/or dirt in fuel can cause problems if it’s used with this unit.

3.Cover unit with a suitable protective cover that does not retain moisture.

WARNING

Storage covers can be flammable.

•DO NOT place a storage cover over a hot generator.

•Let equipment cool for a sufficient time before placing the cover on the equipment.

4.Store generator in clean, dry area.

16

www.usa.husqvarna.com

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Operator’s Manual Where to Find Us Generator Date PurchasedTable of Contents Operator Safety Safety RulesSafety alert symbol is used with a signal word Hazard Symbols and MeaningsEngine exhaust from this product contains Broken bones, fractures, bruises, or sprains could resultContact with muffler area can result in serious burns When Testing for Engine SparkUnintentional sparking can result in fire or electric shock Assembly Install Wheel KitUnpack Generator Add Engine OilConnecting to a Building’s Electrical System System GroundGenerator Location Special RequirementsFeatures and Controls Volt DC batteriesFuel Valve Used to turn fuel supply on and off to engine Items Not ShownCord Sets and Receptacles Volt DC Accessory JackVolt AC, 15 Amp, Duplex Receptacle Connecting Electrical Loads OperationStarting the Engine Stopping the EngineCharging a Battery Cold Weather OperationTo recharge 12 Volt batteries, proceed as follows PositiveAn emergency, use the original shipping carton Creating a Temporary ShelterCreating a Permanent Shelter Don’t Overload Generator Wattage Reference GuideMaintenance Generator MaintenanceEngine Maintenance CleaningStorage Generator StorageLong Term Storage Instructions Storing the EngineTroubleshooting Husqvarna Portable Generator Owner Warranty Policy Product Specifications 877Exploded View Main Unit Exploded View Main Unit Description Parts List Main UnitParts Not Illustrated Exploded View and Parts List Alternator

420 GN specifications

The Husqvarna 420 GN is a powerful and versatile garden tool designed to meet the needs of both professional landscapers and dedicated gardening enthusiasts. This robust chainsaw boasts a range of advanced features and technologies that enhance its performance, ensuring efficient and effective cutting in various outdoor tasks.

One of the standout features of the Husqvarna 420 GN is its powerful engine, which provides a remarkable power-to-weight ratio. The excellent performance is complemented by a low vibration design, allowing extended periods of use without discomfort. The chainsaw is equipped with a centrifugal air cleaning system that significantly reduces the amount of debris and dust entering the air filter. This ensures longer operating periods between air filter cleanings and contributes to the overall longevity of the equipment.

The intuitive design of the Husqvarna 420 GN leads to excellent maneuverability. Its lightweight construction allows users to easily handle the chainsaw during various cutting applications, improving efficiency and precision. The front and rear handles are ergonomically designed, providing a secure grip that enhances control, particularly during demanding cutting tasks.

The chainsaw features an X-Torque engine technology, which minimizes fuel consumption and emissions while maintaining high levels of power. This emphasizes Husqvarna’s commitment to sustainability without compromising performance. Additionally, the chainsaw is equipped with an automatic oil pump that optimizes chain lubrication based on usage, ensuring the chain is always properly lubricated for optimal cutting performance.

The chainsaw is also designed for easy maintenance, with a tool-less chain tensioning system that allows users to adjust the chain tension quickly and efficiently without the need for additional tools. The sturdy construction of the Husqvarna 420 GN, coupled with its ideal size for various cutting tasks, makes it a favorite among professionals and avid gardeners alike.

Overall, the Husqvarna 420 GN is an exceptional choice for those seeking a reliable and powerful chainsaw. With its combination of advanced technologies, ergonomic design, and ease of maintenance, it sets a high standard in the world of outdoor power equipment, making it a valuable addition to any toolkit. Whether tackling heavy-duty jobs or handling lighter pruning tasks, the Husqvarna 420 GN delivers excellence in performance and reliability.
Top Page Image Contents