HTC 968 999732 Parts Identification, Unpacking Instructions, Tools Required, Container Contents

Page 7

UNPACKING INSTRUCTIONS

Remove all parts and packing materials from carton.

Check carton contents against list. Be sure all parts are there.

TOOLS REQUIRED

Two ½" Wrench

9/16" Wrench

9/16" Socket wrench

PARTS IDENTIFICATION

COVER ASSEMBLY

BAG CONTAINERS

CONTAINER CONTENTS

3

- Soft bag containers

2

- Weight brackets

1

- Upper chute

4

- Bolts 3/8-16 x 3¾

1

- Lower chute

8

- Nuts 3/8-16, Nyloc

1

- Catcher mount

8

- Bolts 5/16-18 x 1

1

- Cover Assembly

4

- Bolts 3/8-16 x 3½

2

- Weight plates

 

 

DUMP BAG

INDICATOR

UPPER CHUTE

CHUTE LATCH

LOWER CHUTE

LOWER CHUTE

ATTACHING STRAPS

NOTE: When right hand (RH) and left hand (LH.) are mentioned in this manual, it means when seated on the mower in the operator’s position.

CAUTION

BEFORE ASSEMBLING GRASS CATCHER TO MOWER:

Place motion control levers in “NEUTRAL” position.

Set parking brake.

Turn ignition key “OFF” and remove key.

Make sure the blades and all moving parts have completely stopped.

Disconnect spark plug and place wire where it cannot come in contact with plug.

7

Image 7
Contents Operator Parts Manual Grass Catcher Page Contents II. Slope Operation SafetySafe Operation Practices for RIDE-ON Mowers General OperationIII. Children IV. ServiceDo not Safety Tools Required Container ContentsParts Identification Unpacking Instructions1BAGGER Support Assembly Assembly3CONTAINER Mounting 2MOUNTING Cover Assembly to Support Assembly5UPPER Chute 4LOWER ChuteLevel Mower Deck Front Weight Tips for Improved Bagging Operation OperationGeneral Recommendations Customer ResponsibilitiesStorage Parts Item Part no Parts QTY Description Torque Specifications HEX Head CAP Screws Torque ChartPage 539 132207 IR 03/27/08