HTC 968 999732 manual 2MOUNTING Cover Assembly to Support Assembly, 3CONTAINER Mounting

Page 9

ASSEMBLY

2MOUNTING COVER ASSEMBLY TO SUPPORT ASSEMBLY

NOTE: For ease of assembly, you may wish to obtain the assistance of another person for mounting cover assembly to mower.

1.Position cover assembly on ground behind mower as shown.

2.Lift and rotate cover to align cover brackets with support assembly tubes.

3.Slide cover assembly down onto the support tubes.

Cover Assembly

Support

Assembly

3CONTAINER MOUNTING

1.Install containers on supports, overlapping at center supports.

2.Close cover and lock latch handles over center support tubes.

Cover Latch

Handles

Container

Warning

Center

Support

Tubes

Container

Warning

WARNING!

DO NOT operate mower unless container is properly installed. Container is subject to wear and deterioration, check containers frequently, replace when cracked or damaged. Use only a recommended replacement container.

9

Image 9
Contents Operator Parts Manual Grass Catcher Page Contents Safe Operation Practices for RIDE-ON Mowers SafetyGeneral Operation II. Slope OperationIV. Service III. ChildrenDo not Safety Parts Identification Container ContentsUnpacking Instructions Tools Required1BAGGER Support Assembly Assembly3CONTAINER Mounting 2MOUNTING Cover Assembly to Support Assembly4LOWER Chute 5UPPER ChuteLevel Mower Deck Front Weight Tips for Improved Bagging Operation OperationCustomer Responsibilities General RecommendationsStorage Parts Item Part no Parts QTY Description Torque Specifications HEX Head CAP Screws Torque ChartPage 539 132207 IR 03/27/08