Homelite UT70129, F3055 manual Blade Protector

Page 16

MAINTENANCE

STRING REPLACEMENT

See Figures 18, 19, 20 and 21.

1.Stop the engine and disconnect the sparking plug wire. Hold the string head and unscrew the spool retainer. Turn clockwise.

2.Remove the spool from the string head. NOTE: Keep the spring attached to the spool. Remove any old string remaining on the spool.

3.Cut two pieces of string, each being approximately 2.7 m (9 ft) long.

4.Insert the first string into the anchor hole in the upper part of the spool. Wind the first string round the upper part of the spool anticlockwise, as shown by the arrows on the spool. Place string in the slot on upper spool flange, leaving about 152 mm (6 in) extended beyond the slot. Do not overfill. After winding the string, there should be at least 6 mm (1/4 in) between the wound string and the outside edge of the spool.

5.Repeat above step with second string, using the bottom part of spool. Do not overfill.

6.Replace the spool and the spool retainer. Refer to “Spool Replacement” earlier in this manual.

SPRING

SPOOL

ARROWS ON

SPOOL

ANCHOR

HOLE

FIRST STRING

Fig. 18

FIRST STRING

SLOT

Fig. 19

16

SECOND

STRING

Fig. 20

SLOT

ARROWS ON

 

SPOOL

Fig. 21

BLADE PROTECTOR

See Figures 22.

Always place the blade protector on the blade when the unit is not in use. The blade protector has clips round the edges to snap over the blade and keep it in place. Wear gloves and be cautious when handling the blade.

NOTE: Always remove the blade protector before using the unit. If not removed, the blade protector could become a thrown object as the blade begins to turn.

BLADE

BLADE

PROTECTORCLIPS

Fig. 22

Page 15 Page 17
Image 16
Page 15 Page 17
Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents SafetySpecific Safety Rules for Trimmer USE Specific Safety Rules for Brushcutter and Blade USESymbols Symbol Name ExplanationTechnical Data 12.5Features UnpackingInstructions Packing List for OWNER’S KITAssembly HandleSee Figure Throttle Trigger TOP Clamp Handlebar BottomSilencer Guard Assembly Bent END Silencer Guard Opening in Rear HousingAttaching the Shoulder Strap Grass Deflector and Blade Guard USEDrive Connector Spool Retainer Blade GuardGrass Deflector Converting from Trimmer to BrushcutterInstalling the Blade Installing the String HeadConverting from Brushcutter to Trimmer Removing the BladeFuel and Refuelling OperationOperating the Trimmer Cutting Tips Advancing the StringGrass Deflector Line Trimming CUT- OFF Blade TRI-ARC Blade Operating the BrushcutterCutting Technique Blade Starting and Stopping See Figures 14To Start a Cold Engine To Start a Warm EngineMaintenance Spool Replacement EZ Line TAP Advance SystemNEW PRE-WOUND Spool See Figures 16Blade Protector Cleaning the Exhaust Port and Silencer Replacing and Cleaning AIR FilterSpark Arrester See Figures 23Storage 1 Month or Longer Fuel CAPSparking Plug Troubleshooting Dealer. See FigureIdle Speed Screw Needle Guarantee Safety DirectiveGuarantee Statement Rtsa / Rtuk / RTG EC Declaration of ConformityRyobi Technologies GmbH

F3055, UT70129 specifications

The Homelite UT70129, also known as the F3055, is an innovative and versatile gas-powered string trimmer designed to meet the demands of homeowners and professionals alike. With its blend of power, convenience, and ergonomic design, this tool has become a favorite for those looking to maintain their lawns or gardens effortlessly and efficiently.

One of the standout features of the UT70129 is its powerful 30cc 2-cycle engine, which provides the necessary torque for cutting through tough vegetation. This robust engine strikes a balance between performance and weight, allowing users to maneuver the trimmer easily while still delivering a high level of cutting efficiency. The trimmer can effortlessly tackle weeds, grass, and overgrown foliage with precision.

The F3055 incorporates a lightweight design that enhances user comfort, especially during extended use. Weighing in at just over 10 pounds, the trimmer minimizes fatigue, enabling longer working sessions. It also features an adjustable handle that can be customized to suit the user’s height and preference, promoting a more ergonomic grip and reducing strain on the wrists and arms.

One of the key technologies integrated into the Homelite UT70129 is its automatic line advancement system. This feature eliminates the hassle of manually adjusting the trimmer line, allowing for seamless operation. Users can focus more on their trimming tasks without worrying about line tangles or interruptions. The 18-inch cutting swath is robust enough to cover a large area while maintaining precision, making it ideal for trimming around flowerbeds, fences, and trees.

Durability is another characteristic of the UT70129. The trimmer is constructed from high-quality materials that withstand the rigors of outdoor use. Additionally, the translucent fuel tank allows users to easily monitor fuel levels, enabling them to refuel without interruption.

The Homelite F3055 is also designed for easy maintenance. The inline fuel filter is simple to access, promoting maintenance efficiency while prolonging engine life. Furthermore, the trimmer is equipped with a quick-attach system for accessories, enhancing versatility.

Overall, the Homelite UT70129, or F3055, stands out as a reliable, powerful, and user-friendly option for anyone in need of a gas-powered string trimmer. Its combination of performance, comfort, and durability makes it an essential tool for achieving a well-manicured lawn or garden. Whether you're a seasoned gardener or a homeowner tackling routine maintenance, this trimmer is engineered to deliver satisfying results.
Top Page Image Contents