Homelite F3040, UT70131 manual Silencer Guard Assembly, Grass Deflector and Blade Guard USE

Page 8

SILENCER GUARD ASSEMBLY

1.Remove silencer guard and two screws from the owner’s kit.

2.Attach the silencer guard to the rear housing.

NOTE: Make sure the bent end of the silencer guard fits securely into the opening of the rear housing.

3.Install two screws.

4.Tighten screws securely.

NOTE: When converting from brushcutter to trimmer, or trimmer to brushcutter, make sure the correct guard/ deflector is being used.

REAR HOUSING

SILENCER

GUARD

SCREWS

BENT END OF SILENCER

GUARD

OPENING IN REAR

HOUSING

Fig. 4

GRASS DEFLECTOR FOR

STRING TRIMMER USE

BLADE GUARD FOR

BRUSHCUTTER USE

Fig. 5

Image 8

Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents SafetySpecific Safety Rules for Trimmer USE Specific Safety Rules for Brushcutter and Blade USESymbols Symbol Name ExplanationTechnical Data Features UnpackingInstructions Packing List for OWNER’S KITAttaching the Shoulder Strap AssemblyFront Handle Silencer Guard Assembly Grass Deflector and Blade Guard USEConverting from Trimmer to Brushcutter Blade GuardGrass Deflector Installing the Blade Installing the String HeadConverting from Brushcutter to Trimmer Removing the BladeOperating the Trimmer OperationFuel and Refuelling Grass Deflector Line Trimming CUT-OFF Blade Advancing the StringCutting Tips Cutting Technique Blade Operating the BrushcutterTRI-ARC Blade Ignition Switch Starting and StoppingTo Start a Cold Engine To Start a Warm EngineMaintenance Spool Replacement EZ Line TAP Advance SystemNEW PRE-WOUND Spool See Figures 16Blade Protector Cleaning the Exhaust Port and Silencer Replacing and Cleaning AIR FilterSpark Arrester Latch Pull Cover To Open FilterSparking Plug Fuel CAPStorage 1 Month or Longer Troubleshooting Dealer. See FigureIdle Speed Screw Needle Warranty Safety DirectiveGuarantee Statement Rtsa / Rtuk / RTG Sound Pressure Sound Power Vibration Model Model noRyobi Technologies GmbH