Homelite UT08571, UT08570 manual Assembling the Blower Tubes, See Figures 2

Page 8

ASSEMBLY

WARNING:

Disconnect the spark plug wire before assemblying parts. Failure to do so could result in possible serious personal injury.

ASSEMBLING THE BLOWER TUBES

See Figures 2 - 5.

Place large clamp on the elbow tube and install the elbow tube onto blower. Tighten large clamp securely.

Place large clamp on the bellows and install the bellows onto the elbow. Tighten clamp securely.

Insert upper tube into throttle control handle. Position the throttle control handle in the center of upper tube and tighten wing nut securely.

NOTE: The position of the throttle control handle may be adjusted for the best comfort after the blower is strapped onto the operator's back.

Place small clamp on the bottom end of the bellows and install the upper tube onto the bellows; tighten clamp securely.

Join two straight tubes, thread into the upper tube and tighten securely.

Thread nozzle onto tube assembly and tighten securely.

Tighten all threaded joints securely.

NOTE: Check all threaded joints after initial run to ensure they are tightened securely.

Hold the throttle cable against the bellows and install the cable tie. Cable tie should be tight enough to retain the throttle cable to the bellows but still allow for movement.

LARGE CLAMP

ELBOW

TUBE

LARGE CLAMP

BELLOWS

Fig. 2

 

 

CONTROL HANDLE

THROTTLE CABLE

UPPER TUBE

WING NUT

Fig. 3

 

THROTTLE

CABLE CONTROL

HANDLE

BELLOWS

SMALL CLAMP

UPPER TUBE

Fig. 4

 

Page 8

Image 8
Contents Backpacker Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules Specific Safety RulesSymbols Symbol Name ExplanationService Symbol Signal MeaningProduct Specifications See FigurePacking List AssemblyUnpacking Assembling the Blower Tubes See Figures 2See Figures 6 Adjusting Harness StrapsAssembling Harness Straps Filling the Tank OperationMixing the Fuel See Figures 8 Starting and StoppingOperating the Blower Maintenance Replacing and Cleaning the AIR FilterAccessories Troubleshooting Dealer. See FigureWarranty Limited Warranty StatementManufacturers Warranty Coverage Emissions Maintenance Schedule and Warranted Parts List Service Repair Parts California Proposition

UT08570, UT08571 specifications

The Homelite UT08571 and UT08570 are powerful and efficient string trimmers designed for homeowners and professional landscapers alike. Engineered to simplify garden maintenance, these trimmers are equipped with advanced features that enhance performance and ease of use.

One of the standout characteristics of both models is their lightweight design, which promotes maneuverability while minimizing user fatigue. Weighing in at just under 10 pounds, these trimmers allow for extended use without discomfort. The ergonomic handle design provides a more natural grip, contributing to a seamless trimming experience.

The UT08571 and UT08570 are powered by robust 25cc two-cycle engines. This engine technology delivers ample power to tackle thick weeds and tall grass with ease. The engines ensure efficient fuel consumption, allowing for longer run times before refueling, which is a significant advantage for those undertaking larger landscaping projects.

Both models showcase a bump feed head system that allows for quick and easy line advancement. Simply bumping the trimmer head against the ground releases more string, ensuring that users can maintain continuous operation without the need to stop and manually adjust the line. The dual line cutting feature enhances efficiency, allowing for a wider cutting path of 17 inches, which further speeds up the trimming process.

In terms of technology, the trimmers are designed with a centrifugal clutch that engages the trimmer head only when the throttle is pressed. This feature reduces wear on the engine and string, extending the lifespan of the tool. Additionally, the translucent fuel tank allows users to monitor fuel levels without opening the tank, reducing the risk of spills and facilitating easier refueling.

For those looking for versatility, both models are compatible with various attachments, enabling users to convert them for different landscaping tasks, such as edging or pruning. This adaptability makes the UT08571 and UT08570 excellent additions to any gardening toolkit.

Safety considerations are also paramount in the design of these trimmers. They come with protective guards to shield users from debris, ensuring a safer trimming experience. With easy start technology, both models feature a simple start mechanism that minimizes the effort required to fire up the engine.

Overall, the Homelite UT08571 and UT08570 string trimmers are a blend of innovation, efficiency, and user-friendly features, making them ideal choices for maintaining a pristine yard or garden. Whether you are a seasoned gardener or just starting, these trimmers provide reliability and power for all your trimming needs.