Homelite UT08120D manual Cruise Control Throttle Lock, Wide Sweeper Nozzle Throttle Trigger

OPERATION

nOperate blower at the lowest possible throttle speed to do the job.

�n Check the equipment before operation, especially the muffler, air intakes, and air filters.

�n Use rakes and brooms to loosen debris before blowing.

�n In dusty conditions, slightly dampen surfaces when water is available.

�n Conserve water by using power blowers instead of hoses for many lawn and garden applications, including areas such as gutters, screens, patios, grills, porches, and gardens.

�n Watch out for children, pets, open windows or freshly washed cars, and blow debris safely away.

�n Use the full blower nozzle extension so the air stream can work close to the ground.

�n After using blowers or other equipment, CLEAN UP! Dispose of debris in trash receptacles.

�n Use the wide sweeper nozzle for the everyday blowing operation. This nozzle allows for more area to be covered during the blowing operation.

�CRUISE CONTROL (THROTTLE LOCK)

See Figure 7.

The Cruise Control (throttle lock) can be used to operate the blower without holding the throttle trigger.

TO ENGAGE THE CRUISE CONTROL (THROTTLE LOCK):

nTurn the Cruise Control knob clockwise, toward the back of the blower, and stop at the desired throttle setting.

nTo release the Cruise Control, depress and release the throttle trigger.

Page 10

WIDE SWEEPER

NOZZLE

Fig. 6

THROTTLE

TRIGGER

CRUISE CONTROL KNOB (THROTTLE LOCK)

Fig. 7