Homelite UT74121D manual Specific Safety Rules, General Precautions

Page 4

GENERAL SAFETY RULES

KEEP ALL PARTS OF YOUR BODY away from the saw chain when the engine is running.

ALWAYS CARRYTHE CHAINSAW WITHTHE ENGINE STOPPED AND THE BRAKE ENGAGED, the guide bar and saw chain to the rear, and the silencer away from your body. When transporting the chainsaw, use the appropriate guide bar scabbard.

DO NOT OPERATE A CHAINSAWTHAT IS DAMAGED, improperly adjusted, or not completely and securely assembled. Be sure that the saw chain stops moving when the throttle control trigger is released.

TURN OFF THE ENGINE before putting the chainsaw down. DO NOT leave the engine running unattended. As an additional safety precaution, apply the chain brake before putting down the saw.

USE EXTREME CAUTION when cutting small-size brush and saplings because slender material may catch the saw chain and be whipped toward you or pull you off balance.

WHEN CUTTING A LIMB under tension, be alert for spring-back so that you will not be struck when the tension in the wood fibres is released.

KEEP THE HANDLES dry, clean, and free of oil or fuel mixture.

OPERATE THE CHAINSAW ONLY in well-ventilated areas.

DO NOT OPERATE A CHAINSAW IN ATREE unless you have been specifically trained to do so.

ALL CHAINSAW SERVICE, other than the items listed in the instruction manual and all maintenance, should be performed by competent chainsaw service personnel. (For example, if improper tools are used to remove the flywheel or if an improper tool is used to hold the flywheel in order to remove the clutch, structural damage to the flywheel could occur and subsequently cause the flywheel to burst.)

KEEP SAFE-T-TIP® ANTI-KICK-BACK NOSE GUARD properly mounted on the guide bar to prevent rotational kick-back.

FOLLOW THE SHARPENING and maintenance instructions for the saw chain.

USE ONLY THE REPLACEMENT GUIDE BARS and low kick-back chains specified for your saw.

DO NOT adapt your powerhead to a bow guide or use it to power any attachments or devices not listed for your saw.

SAVE THESE INSTRUCTIONS. Refer to them frequently and use to instruct other users. If you lend someone this tool, lend them these instructions also.

SPECIFIC SAFETY RULES

WARNING:

The warnings, labels, and instructions found in this section of the operator’s manual are for your safety. Failure to follow all instructions may result in serious personal injury.

GENERAL PRECAUTIONS

DO NOT CUT VINES and/or small undergrowth (less than 76 mm (3 in.) in diameter).

SILENCER SURFACES ARE VERY HOT during and after operation of the chainsaw; keep all body parts away from the silencer. Serious burns may occur if contact is made with the silencer.

ALWAYS HOLDTHE CHAINSAWWITH BOTH HANDS when the engine is running. Use a firm grip with thumbs and fingers encircling the chainsaw handles.

NEVER LET ANYONE USE YOUR CHAINSAW who has not received adequate instructions in its proper use. This applies to rentals as well as privately owned saws.

BEFORE YOU START THE ENGINE, make sure the saw chain is not contacting any object.

OPERATE THE CHAINSAW only in well ventilated areas.

UK - Page 4

Image 4
Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules Read ALL InstructionsSpecific Safety Rules General PrecautionsProper Clothing for Safety Basic Precautions in the CUTTING/ Work AreaMaintenance Precautions Refuelling do not SmokeSymbols Symbol Name ExplanationSpecifications Features Understanding Your Chainsaw Safety DevicesOperation Guide BarsKICK-BACK Precautions Fuel and RefuellingChain OIL System Handling the Fuel SafelyStopping the Engine Starting the EnginePreparing for Cutting Basic OPERATING/CUTTING Procedures Work Area PrecautionsAdjusting the Carburettor Push and PullAdjusting Idling Speed Proper Procedure for Tree FellingOperating the Chain Brake Felling Trees Hazardous ConditionsBucking Removing Buttress RootsLimbing and Pruning Maintenance Adjusting the Chain TensionCutting Spring Poles Assembling the BAR and ChainChain Maintenance Sharpening the CuttersTOP Plate Filing Angle Side Plate AngleCleaning the AIR Filter Maintaining the Guide BARMaintaining the SAFE-T-TIP Nose Guard Mounting the SAFE-T-TIP Nose GuardCleaning the Starter Unit Cleaning the EngineCleaning the Spark Arresting Silencer Checking the Fuel FilterBAR and Chain Combinations TroubleshootingStoring the Chainsaw 1 Month or Longer Guarantee Statement Rtsa / Rtuk / RTG WarrantyProblem Possible Cause Solution Safety Directive EC Declaration of Conformity

UT74121D specifications

The Homelite UT74121D is a versatile and efficient string trimmer designed for homeowners and gardening enthusiasts who seek an effective solution for lawn maintenance. This machine excels at tackling overgrown grass, weeds, and edging tasks, offering performance and convenience.

One of the standout features of the Homelite UT74121D is its powerful 14-amp electric motor. This robust motor delivers consistent performance and ample cutting power, making it suitable for various landscaping tasks. Unlike gas-powered trimmers, the electric motor ensures quieter operation with zero emissions, making it an environmentally friendly choice.

The trimmer is equipped with a 17-inch cutting width, providing an expansive area for trimming, thus reducing the time needed to complete yard work. Featuring a dual-line feed system, the UT74121D allows for efficient cutting. The automatic line advance ensures that users can focus on their trimming without frequent interruptions to replace the line.

The lightweight design of the Homelite UT74121D contributes to its user-friendliness. Weighing in at just over 10 lbs, it is easy to maneuver, making it suitable for both large yards and tight spaces. The balanced design helps reduce user fatigue, allowing for longer periods of use without strain.

Another key characteristic of the UT74121D is the adjustable telescopic shaft. It can be extended or shortened to accommodate users of different heights, enhancing comfort and control during operation. This customizable feature enables better ergonomics and reduces the risk of back strain.

The Homelite UT74121D also incorporates a convenient pivoting head that allows for versatile trimming positions. This feature is particularly useful for edging alongside sidewalks and driveways, as well as for accessing hard-to-reach areas, making it a multi-functional tool for comprehensive yard work.

Moreover, the trimmer comes with a safety guard to protect the user from flying debris, promoting a safer mowing experience. The straightforward assembly and operation further appeal to users, with easy-to-follow instructions that make setup a breeze.

In conclusion, the Homelite UT74121D string trimmer is a practical and efficient tool for homeowners looking to maintain their lawns effectively. With its powerful motor, expansive cutting width, lightweight design, adjustable shaft, and safety features, this trimmer checks all the boxes for a reliable gardening companion. Whether you’re edging, trimming, or maintaining your yard, the UT74121D is designed to meet your landscaping needs with ease and efficiency.