Homelite UT74121D manual Cleaning the Starter Unit, Cleaning the Engine, Checking the Fuel Filter

Page 17

MAINTENANCE

Choose one of the following cleaning options:

9.To lightly clean, tap the filter against a smooth, flat surface to dislodge most saw dust and dirt particles.

10.For a more thorough cleaning, clean in warm soapy water, rinse, and let dry completely.

NOTE: An alternative method is to clean the filter with compressed air (always wear eye protection to avoid eye injury).

11.Reinstall the air filter, making sure that the tabs on the air filter are located in channels on the air filter bottom before tightening filter retainer screw.

■Clean the pre-filter (D) every 25 tanks of fuel or sooner, if required. Remove the cylinder cover (B), starter assembly (E) and the fan housing baffle (F) for access to the pre-filter in the engine housing.

NOTE: If you use an air hose for drying, blow through both sides of filter.

CAUTION:

Never run the engine without the air filter: serious damage could result.

Make sure the air filter is correctly placed in the air filter cover before reassembly.

CLEANING THE STARTER UNIT

See Figure 67.

Use a brush or compressed air to keep the cooling vents of the starter assembly free and clean of debris.

CLEANING THE ENGINE

See Figures 68 and 69.

Clean the cylinder fins and flywheel fins with compressed air or a brush periodically. Dangerous overheating of the engine may occur due to impurities on the cylinder.

WARNING

Never run the saw without all the parts, including the drivecase cover and starter housing, securely in place.

Because parts can fracture and pose a danger of thrown objects, leave repairs of the flywheel and clutch to trained Homelite service dealer personnel.

NOTE: Depending on the type of fuel used, the type and amount of oil used, and/or your operating conditions, the exhaust port and silencer may become blocked with carbon deposits. If you notice a power loss with your petrol-powered tool, you may need to remove these deposits to restore performance. We highly recommend that only qualified service technicians perform this service.

CHECKING THE FUEL FILTER

See Figure 70.

Check the fuel filter (A) periodically. Replace it if contaminated or damaged.

REPLACING THE SPARKING PLUG

See Figure 71.

This engine uses a Champion RCJ-6Y with 0.63 mm (0.025 in.) electrode gap. Use an ex act replacement and replace every six months, or more frequently if necessary.

1.Loosen the sparking plug by turning it anticlockwise with a spanner.

2.Remove the sparking plug.

3.Hand thread the new sparking plug, turning it clockwise.

NOTE: Be careful not to cross-thread the sparking plug. Cross-threading will seriously damage the product.

CLEANING THE SPARK ARRESTING SILENCER

See Figure 72.

The silencer (A) is equipped with a spark arrester screen (B). A faulty spark arrester screen can create a fire hazard. Through normal use the screen can become dirty and should be inspected weekly and cleaned as required. Always keep the silencer and spark arrester on your saw in good condition.

WARNING

Silencer surfaces are very hot during and after operation of the chainsaw. Keep all body parts away from the silencer. Serious burns may occur if contact is made with the silencer.

1.Allow the silencer to cool.

2.The spark arrester screen (B) is retained by the deflector (C). Remove the three nuts (D) and deflector retaining screw (E) to access the spark arrester screen.

3.Replace the spark arrester screen if it is cracked or otherwise deteriorated.

CHAIN BRAKE

See Figures 73 and 74.

■Remove the clutch cover and clean the chain brake components. Check wear on the brake band (A). If brake band is worn or deformed, have it serviced at your nearest authorised service dealer. The band thickness should not be less than 0.60 mm (0.024 in.), or worn halfway through.

■Always keep the chain brake mechanism clean (B) and lightly lubricate the linkage (C).

■Always test the chain brake performance after servicing or cleaning. Refer to “Operation – Operating Chain Brake” earlier in this manual for additional information.

■Check and, if damaged, replace the chain catcher (D).

UK - Page 17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction Table of ContentsRead ALL Instructions General Safety RulesGeneral Precautions Specific Safety RulesBasic Precautions in the CUTTING/ Work Area Proper Clothing for SafetyMaintenance Precautions Refuelling do not SmokeSymbol Name Explanation SymbolsSpecifications Understanding Your Chainsaw Safety Devices FeaturesOperation Guide BarsFuel and Refuelling KICK-BACK PrecautionsChain OIL System Handling the Fuel SafelyPreparing for Cutting Starting the EngineStopping the Engine Work Area Precautions Basic OPERATING/CUTTING ProceduresAdjusting the Carburettor Push and PullProper Procedure for Tree Felling Adjusting Idling SpeedOperating the Chain Brake Felling Trees Hazardous ConditionsLimbing and Pruning Removing Buttress RootsBucking Adjusting the Chain Tension MaintenanceCutting Spring Poles Assembling the BAR and ChainSharpening the Cutters Chain MaintenanceTOP Plate Filing Angle Side Plate AngleMaintaining the Guide BAR Cleaning the AIR FilterMaintaining the SAFE-T-TIP Nose Guard Mounting the SAFE-T-TIP Nose GuardCleaning the Engine Cleaning the Starter UnitCleaning the Spark Arresting Silencer Checking the Fuel FilterStoring the Chainsaw 1 Month or Longer TroubleshootingBAR and Chain Combinations Problem Possible Cause Solution WarrantyGuarantee Statement Rtsa / Rtuk / RTG EC Declaration of Conformity Safety Directive

UT74121D specifications

The Homelite UT74121D is a versatile and efficient string trimmer designed for homeowners and gardening enthusiasts who seek an effective solution for lawn maintenance. This machine excels at tackling overgrown grass, weeds, and edging tasks, offering performance and convenience.

One of the standout features of the Homelite UT74121D is its powerful 14-amp electric motor. This robust motor delivers consistent performance and ample cutting power, making it suitable for various landscaping tasks. Unlike gas-powered trimmers, the electric motor ensures quieter operation with zero emissions, making it an environmentally friendly choice.

The trimmer is equipped with a 17-inch cutting width, providing an expansive area for trimming, thus reducing the time needed to complete yard work. Featuring a dual-line feed system, the UT74121D allows for efficient cutting. The automatic line advance ensures that users can focus on their trimming without frequent interruptions to replace the line.

The lightweight design of the Homelite UT74121D contributes to its user-friendliness. Weighing in at just over 10 lbs, it is easy to maneuver, making it suitable for both large yards and tight spaces. The balanced design helps reduce user fatigue, allowing for longer periods of use without strain.

Another key characteristic of the UT74121D is the adjustable telescopic shaft. It can be extended or shortened to accommodate users of different heights, enhancing comfort and control during operation. This customizable feature enables better ergonomics and reduces the risk of back strain.

The Homelite UT74121D also incorporates a convenient pivoting head that allows for versatile trimming positions. This feature is particularly useful for edging alongside sidewalks and driveways, as well as for accessing hard-to-reach areas, making it a multi-functional tool for comprehensive yard work.

Moreover, the trimmer comes with a safety guard to protect the user from flying debris, promoting a safer mowing experience. The straightforward assembly and operation further appeal to users, with easy-to-follow instructions that make setup a breeze.

In conclusion, the Homelite UT74121D string trimmer is a practical and efficient tool for homeowners looking to maintain their lawns effectively. With its powerful motor, expansive cutting width, lightweight design, adjustable shaft, and safety features, this trimmer checks all the boxes for a reliable gardening companion. Whether you’re edging, trimming, or maintaining your yard, the UT74121D is designed to meet your landscaping needs with ease and efficiency.
Top Page Image Contents