Homelite UT74121A manual Specific Safety Rules, General Precautions, Safety Apparel

Page 5

SPECIFIC SAFETY RULES

WARNING:

The warnings, labels and instructions found in this section of the operator’s manual are for your safety. Failure to follow all instructions may result in serious personal injury.

GENERAL PRECAUTIONS

DO NOT CUT VINES and/or small underbrush (less than 76 mm (3 in.) in diameter).

SILENCER SURFACES ARE VERY HOT during and after operation of the chainsaw; keep all body parts away from the silencer. Serious burns may occur if contact is made with the silencer.

ALWAYS HOLD THE CHAINSAW WITH BOTH HANDS when the engine is running. Use a firm grip with thumbs and fingers encircling the chainsaw handles.

NEVER LET ANYONE USE YOUR CHAINSAW who has not received adequate instructions in its proper use. This applies to hired as well as privately owned saws.

BEFORE YOU START THE ENGINE, make sure the saw

chain is not contacting any object.

OPERATE THE CHAINSAW only in well ventilated areas.

SAFETY APPAREL

Wear snug-fitting clothing. Always wear heavy, long trousers, boots and gloves. Do not wear jewellery, shorts, sandals, or go barefoot. Do not wear loose-fitting clothing, which could be drawn into the engine or catch the chain or underbrush. Wear overalls, jeans or chaps made of cut-resistant material or ones that contain cut-resistant inserts. Secure hair so that it is above shoulder level.

Wear non-slip safety footwear and heavy-duty gloves to improve your grip and to protect your hands.

Wear eye, hearing and head protection when operating this equipment.

REFUELLING (DO NOT SMOKE!)

To reduce the risk of fire and burn injury, handle fuel with care. It is highly flammable.

Mix and store fuel in a container approved for petrol. Mix fuel outdoors where there are no sparks or flames.

Select bare ground, stop the engine, and allow it to cool before refuelling.

Loosen the fuel cap slowly to release pressure and to keep fuel from escaping round the cap.

Tighten the fuel cap securely after refuelling.

Wipe spilled fuel from the unit. Move 9 m (30 ft.) away from refuelling site before starting engine.

Never attempt to burn off spilled fuel under any circumstances.

BASIC PRECAUTIONS IN THE CUTTING/ WORK AREA

Do not operate a chainsaw in a tree.

Do not cut from a ladder: this is extremely dangerous.

Keep bystanders and animals out of the work area.

Do not allow other persons to be nearby during starting or cutting with the chainsaw.

NOTE: The size of the work area depends on the job being performed, as well as the size tree or work piece involved. For example, felling a tree requires a larger work area than making other cuts such as bucking cuts etc.

UK - Page 5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction Table of ContentsRead ALL Instructions General Safety RulesDo not Operate a Chainsaw That is Damaged General Precautions Specific Safety RulesSafety Apparel Basic Precautions in the CUTTING/ Work AreaPush and Pull Maintenance PrecautionsKICK-BACK Pull PushSymbol Name Explanation SymbolsRUN StopSpecifications Features Operation Understanding Your Chainsaw Safety DevicesLOW KICK-BACK SAW Chain Guide BarsChain Brake KICK-BACK PrecautionsRUN Position KICK-BACK Brake Position RotationalHandling the Fuel Safely Fuel and RefuellingMixing the Fuel Filling the TankChain OIL System Brake Position Ignition Switch RUN Primer BulbStarting the Engine See Figures 10 toStarting a Cold Engine Starting a Warm Engine Stopping the EngineProper Grip on Handles Preparing for CuttingChain Line Proper GripWork Area Precautions Basic OPERATING/CUTTING ProceduresAdjusting the Carburettor See Figures 24Brake Position RUN Position Adjusting Idling SpeedOperating the Chain Brake Retreat Path Felling Trees Hazardous ConditionsRetreat Proper Procedure for Tree FellingPlanned Line of Fall Notch Approx /3 Diameter Trunk Back CUT HingeHinge Back CUT WedgeBucking Removing Buttress RootsBucking with a Wedge Vertical CUT Loose Section Horizontal KICK-BACK WedgeOverbucking Bucking Logs Under StressUnderbucking LOG Supported AT ONE END Finishing CUTCutting Spring Poles Limbing and PruningLoad Second CUT Finishing CUT Spring PoleAssembling the BAR and Chain MaintenanceCutters Chain Tensioning Screw Chain Maintenance Adjusting the Chain TensionSee Figures 52, 53 Flats on Drive LinksSharpening the Cutters Check for Wear or Damage LEFT-HAND Cutters RIGHT-HAND Side Plate Angle Maintaining Depth Gauge ClearanceTOP Plate Filing Angle Maintaining the Guide BAR Restore Original Shape by Rounding FrontMaintaining the SAFE-T-TIP Nose Guard Lubricating HoleMounting the SAFE-T-TIP Nose Guard Cleaning the AIR FilterTighten 3/4 Turn See Figures 71, 72Cleaning the Engine Cleaning the Starter UnitChecking the Fuel Filter Replacing the Sparking PlugChain Catcher Brake Band Clean the Chain Brake Cleaning the Spark Arresting SI- LencerChain Brake Storing the Chainsaw 1 Month or LongerBAR and Chain Combinations TroubleshootingProblem Possible Cause Solution But chain is not rotating Tions. See FigureSafety Directive WarrantyGuarantee Statement Rtsa / Rtuk / RTG EC Declaration of ConformityPage Ryobi Technologies GmbH

UT74121A specifications

The Homelite UT74121A is a versatile gas-powered string trimmer designed for homeowners and landscapers seeking an efficient tool for maintaining their lawns and gardens. Known for its reliability, the UT74121A combines performance with user-friendly features that make lawn care tasks less daunting.

One of the standout features of the UT74121A is its powerful 26cc 2-cycle engine. This engine provides ample power for cutting through dense grass and weeds, ensuring that tasks are completed quickly and efficiently. The lightweight design of the trimmer, coupled with its ergonomic handle, allows users to maneuver easily, making it ideal for extended use without causing fatigue.

The Homelite UT74121A is equipped with an easy-to-load bump feed spool for quick line replacement. Users can effortlessly advance the cutting line by tapping the trimmer's head on the ground, making it convenient to maintain the desired cutting length without interrupting work. The trimmer uses .095-inch diameter line, which provides durability and resilience against tough conditions.

In terms of design, the UT74121A features a straight shaft that offers increased reach and allows users to access hard-to-reach areas with ease. This design is particularly helpful for trimming along fences, in flower beds, and under low-hanging branches. The adjustable handle height further enhances user comfort, allowing for customization based on individual preferences.

Safety is a primary concern for any outdoor equipment, and the UT74121A incorporates several features to enhance user safety. It comes with a protective shield that prevents debris from being thrown during operation, and the easy-starting system reduces pull effort, making it accessible for users of all skill levels.

The trimmer also adheres to stringent emissions standards, making it an environmentally-friendly option in today's market. With proper maintenance, the UT74121A ensures longevity and sustained performance, making it a valuable addition to any landscaping toolkit.

Overall, the Homelite UT74121A is a powerful and efficient solution for those seeking a reliable string trimmer. Its combination of a robust engine, user-centric design, and safety features makes it suitable for various lawn care tasks, ensuring gardens and lawns remain well-groomed year-round.
Top Page Image Contents