Table Of Contents, Features | Holman N10372 specification

PAGE 1

Features	1
Glossary	2
Programming Instructions
Introduction	3
Programming Example	4
Other Functions	5
General tips for programming	5
Programming
Set Current Time & Correct Day	6
Set Calendar (Optional)	6
Step 1. Set Start Times	7
Step 2. Set Watering Days	8
Interval Day Selection	8
Individual Day Selection	8
Odd / Even Day Selection	9
Step 3. Set Station Run Times	9-10
Manual Operations
System test facility	11
RunASingle Station	11
RunAProgram	12
Other Features
Stop	12
Stacking Start Times	12
Automatic BackUp Program	12
Rain Sensor Ready	13-15
Rain Off Mode	16
Water Budgeting	16
Installation Instructions
Mounting The Controller	17
Electrical Hook-Up	17
Field Wiring Connections	18
Terminal Block Layout	18
Power Supply Connections	19
Connection Of Valves	19
Pump Hook-Up Connections	20
Electrical Characteristics	21
Servicing The Controller	22
Fault Finding Guide	23
Spare Watering Planners	24-25

Features

This unit is available as a 6 station configuration.

Designed for residential and light commercial applications, this controller has four separate programs with up to sixteen possible start times a day. This ensures efficient watering of different garden or turf areas.

These different areas may require individual watering programs and often use different types of sprinklers.

Examples: Turf areas generally use pop-up sprinklers and require less frequent but heavier watering. However, flower beds use micro sprays and require more frequent watering. The valves (stations) which water similar garden areas are often grouped together and put into the same program as they need to be watered on the same days.

These stations (valves) will water in sequential order from the lowest number at the start time (or times) nominated and on the days selected. Maximum watering duration for a station (valve) is 12 hours and 59 minutes.

This controller has three types of watering day options. Either, interval watering from everyday to every 15th day, individual day selection per program, or a 365 day calendar for ODD/EVEN day watering.

An innovative feature of this controller is the Rain Sensor Ready (RSR) technology. This allows individual stations to be controlled by a rain sensor. In this way, garden areas that are subject to rain, can have their irrigation suspended during wet periods, while areas under cover can continue to be watered.