Programming
Set Current Time & Correct Day
Turn the dial to Set Clock/Calendar position.
The hour will be flashing. Use 
or 
to adjust.
Note: AM / PM must be set correctly.
Press the next button and the “minutes” will flash.
Use 
or 
to adjust.
Press next and the “day of the week” will flash.
Use 
or 
to set correct day.
Set Calendar (Optional)
Note: The calendar only needs to be set when selecting ODD/EVEN day watering in areas where water restrictions may require this feature.
Press back button until the year, month and day are shown. The “year” will be flashing.
Use 
or 
to adjust, if required.
Press back button and the “month” will flash.
Use 
or 
to adjust.
Press back and the “day” will flash. Use 
or 
to
adjust. Tip: To return to the clock, press next , or turn dial to another position.
Note: When in the “Auto” position “ODD” or “EVEN” will be shown.
PAGE 6
Programming
Before proceeding, ensure your watering planner has been completed. From this, you should be aware of which stations are allocated to each program.
Note: Set one program at a time
SETTING PROGRAM 1 - The program number can only be set/changed in the Set Start Times position.
Step 1. Set Start Times
All valves will activate in sequential order for each start time. Turn the dial to Set Start Times and ensure that “Prog 1” is flashing.
The display will show:
Press next & “Start 1” willl flash.
Press next & the “hour” will flash. Use 
or 
to adjust. Note: AM / PM is set correctly.
Press next & the “minutes” will flash. Use 
or 
to
adjust, if required. Each program has up to four start times and should you require a second start time, Press next twice & “Start 1” will flash.
Advance to start 2 by pressing 
.
The display will show.
Press next and proceed as per setting Start 1.
Tip: To turn an active start time off, turn the dial to the Set Start times position, Select the start number required
using the 
button and then press next until the “hour” is flashing. Use 
or 
until “OFF” is shown.
Tip: “OFF” position is between 12 and 1pm. | PAGE 7 |
|