ASSElldBLY

1.Assemble the link pins to the A-frame halves using %"jamnuts, lock washers and hex nuts.

2.Join the frame halves together with the spacing plate. Secure the plate at the front

.holesonly with the hex bolts, lock washers and hex nuts. Finger-tighten the bolts.

HEX. BOLT,

Yz x 13h

WASHER

3.Assemble the frame angles to the A-frame as shown. Install the hex bolts, plain washers, lock washers and hex nuts: finger-tighten.

4.Install the struts first at the rear of the A-frame, and then at the rear of the frame angles. Finger-tighten the bolts.

NOTE The frame is shown assembled for the most common cutting position (goo).The cutting angle is determined by where the struts are attached to the frame angles.

5.Assemble a spring shank at positions 1 and 2-where frameangles attach to A-frame-with existing hardware.

Assemble the remaining spring shanks as shown. Use (thick)washers between the springs and frame angles.*

6.Align the springs and tighten all frame and spring bolts securely.

'h x 13h

PLAIN WASHER

LOCK WASHER

HEX. NUT

POSITION 1

HEX. BOLT,

Yz x 13h

PLAIN WASHER

LOCK WASHER

HEX. NUT>A

HEX. BOLT,

'12 x 13h

LOCK WASHER

HEX. NUT

FRAME

ANGLES