HP FS-8000C manual Error Messages, Message Corrective Action

5.3 Error Messages

5.3Error Messages

The tables on the following pages indicate how to respond to problems indicated by the operator panel indicators and messages.

5.3.1Error Messages

The following table lists errors and maintenance messages that can be dealt with by yourself. If

Call service appears, turn off the printer, disconnect the power cord, and contact your

Kyocera Mita dealer.

Some errors cause the alarm sound to sound. To stop the alarm sound, press the CANCEL key to stop the alarm sound.

Message Corrective Action

Add paper (paper source) The paper has run out in the paper source displayed. Supply paper accord- ing to the paper source displayed (paper cassettes, MP tray, or optional paper feeders).

		This message is displayed alternately with messages indicating the printer
		status, such as, Ready, Please wait, Processing, Waiting, and
		Form Feed Time Out. If the number of copies to print is 2 or more,
		only the Add paper message is displayed.
Add staples		The optional document finisher has run out of staples. Replenish staples
Press GO		and press the GO key.
Call service		#### represents a mechanical error (#=0, 1, 2, ...). Call a service. The
####:0123456		printer does not operate when this message is displayed. The total number
		of pages printed is also indicated, e.g. 0123456.
Call service		F### represents a controller error (#=0, 1, 2, ...). Call a service. The
F###:0123456		printer does not operate when this message is displayed.
Call service		This message means an error in data communications between the printer
Person	F0	controller and the operator panel. Call a service.
Cassette #		The corresponding paper cassette is not installed. Install the cassette. The
not loaded		cassette number can be 1 (topmost) to 6 (bottom); and for the duplexer
		model, 2 to 6.
Check waste toner		This message warns following two cases. Install the new waste toner bottle.
bottle		• The waster toner bottle is not installed.
		• The waste toner bottle is almost full.
Clean printer		The printer has reached the schedule to conduct cleaning. Clean the inside
Press GO		of the printer . See Chapter 6 Maintenance, section 6.5 Cleaning the
		Printer on page 6-16. This message will be automatically displayed when
		replacing the toner container after the message Replace toner TK-
		82 is displayed. After cleaning the inside of the printer, press the GO key
		and the printer will resume printing.
Duplex drawer		The duplex drawer is not installed. Install the duplex drawer. This message
not loaded		is applicable to the duplexer model.
Face-down tray		The face-down tray has become full (approx. 500 pages). You must
paper full		remove all printed pages from the face-down tray. When the printer senses
		that the face-down tray is empty again, the printer will continues printing
		into the face-down tray.

Table 5-3

5-7