HP FS-8000C manual Pen Adjust ? Pen, Pen1 Width 02dots, Pen1 Color ? Black, KC-GL Page Set ? A2

					3.6 Making Default Settings
7	To change the pen width and/or pen color, press the ENTER key. A blinking question
	mark (?) appears.
		>KC-GL	Pen	>

8

9

Adjust ? Pen (1)

Press the U or V key repeatedly until the desired pen number of 1 to 8 appears.

When the desired pen number is displayed, press the ENTER key.

10	To change the pen width, press the Z key, then press the ENTER key. A blinking
	cursor appears at the width value.
		>>Pen(1)		Width
			02dot(s)
	Press the U or V key repeatedly until the desired pen width in dots (00 to 99) appears.
	When the desired pen width is displayed, press the ENTER key.
11	To set the pen color, press the U or V key. To change the pen color, press the ENTER
	key. A blinking question mark (?) appears.
			>>Pen(1) Color
		? Black

12

13

Press the U or V key repeatedly until the desired pen color (Black, Red, Green, Yellow, Blue, Magenta, Cyan, White) appears. When the desired pen color is displayed, press the ENTER key.

To set the KC-GL page size, press the Y key twice, then Press the U or V key until >KC-GL Page Set is displayed.

To change the page size, press the ENTER key. A blinking question mark (?) appears.

>KC-GL Page Set

? [A2]

Press the U or V key repeatedly until the desired page size (A2, A1, A0, B3, B2, B1, B0, and SPSZ) appears. The SPSZ command sets the paper edge limits to the dimensions of a standard paper size. See this command explained in the Programming Manual in the CD-ROM.Press the ENTER key to set the page set you just selected.

14 Press the MENU key. The display returns to Ready.

3-49