HP FS-8000C manual Printer Specification

C.1 Printer Specification

C.1	Printer Specification
		Item		Specification
		Printing method		Electrophotographic four color (CMYK) printing using
				laser diode.
		Printing speed		See section C.2 Printing Speeds on page C-4.
		Resolution		600 dpi (horizontal and vertical)
		First print (A4, 23 °C)		Approximately 17 seconds (monochrome)
				Approximately 28 seconds (color)
		Warm up time (23 °C)		300 seconds or less
		Main Controller CPU		PowerPC 750CX (400 MHz)
		Main memory		64 MB, expandable up to 256 MB maximum
		Expansion Memory Module		32, 64, or 128 MB (for 2 slots)
		Operating system		Windows 3.1, Windows 95/98/Me, Windows NT/2000,
				Macintosh, Linux
		Protocol support		IPX/SPX, TCP/IP, DLC
		Interfaces	Parallel	IEEE1284, 1
			Serial	RS-232C, 1
			Option	2, Network interface card or hard disk (KUIO)
		Memory card slot		Compact flash memory card, maximum 64 MB
		Self-diagnostics		Performed at power-on
		Maximum duty cycle (for standard dry A4		100,000 pages per month for monochrome; 25,000 pages
		plain paper)		per month for color
		Imaging drum		Amorphous silicon drum
		Developers		Four (CMYK) dual-component dry developers
		Main charger		Positive scorotron charger
		Transferring	Primary	Drum system
			Secondary	Roller system
		Separation		Corona charger
		Drum cleaning		Blade cleaner
		Primary transfer drum cleaning		Brush cleaner
		Drum discharging		LED array
		Fuser		Heat rollers
		Toner saving		EcoPrint mode (monochrome printing only)
		Paper		See Chapter 2 Handling Paper, section 2.1.2 Paper speci-
				fications on page 2-2.
		Paper sizes	Cassettes	A3, B4, A4, B5, A5, ledger, legal, and letter sizes, adjust-
				able
			Multi-purpose tray	80 ⋅ 148mm to 310 ⋅ 458 mm
		Unprintable areas		A top, bottom, left, or right margin of 4 mm
		Paper capacity	Cassettes	500 sheets (80 g/m2)
			Multi-purpose tray	150 sheets (80 g/m2)

Table C-1

C-2