1.2 Parts and Functions
1.2.2Internal
Figure
1Black Toner Container
This container holds black (K) toner. You must replace the container when the toner run out.
2Main Charger Unit
This is an electrical component used to transfer the toner onto the drum unit. The main charger unit must be cleaned when you replace the toner container.
3Yellow Toner Container
This container holds yellow (Y) toner. You must replace the container when the toner run out.
4Magenta Toner Container
This container holds magenta (M) toner. You must replace the container when the toner run out.
5Cyan Toner Container
This container holds cyan (C) toner. You must replace the container when the toner run out.
6Power Cord Connector
This connector accepts the power cord supplied with the printer.
The power cord must not be unplugged from power at least 30 minutes since the printer is switched off.
Caution
7Waste Toner Bottle
This plastic bottle collects waste toner for later disposal. The bottle has a cap which is used to seal the bottle opening when being disposed of.
