3.13 Other Modes
5 | To change the timeout time, press the ENTER key. A blinking cursor (_) appears. | |||
|
|
|
|
|
|
| >Form Feed Time. |
| |
|
|
|
|
|
|
| Time Out 030sec. |
| |
|
|
|
|
|
|
|
|
|
|
6 | Press the U or V key to increase or decrease the value at the blinking cursor and set | |||
| the desired time. The timeout time can be between 0 and 495 seconds, in | |||
increments. Use the Z and Y keys to move the cursor right and left.
7
8
When the desired timeout time is displayed, press the ENTER key.
To exit the menu selection, press the MENU key.
3.13.3Setting the Sleep Timer
The printer has a sleep timer that is used to conserve power when the printer is not printing, processing, or receiving data.
You can turn off or on the sleep timer function using the following procedure.
1
2
3
Press the MENU key.
Press the U or V key repeatedly until Others > appears.
Others >
Press the Z key.
4 Press the U or V key repeatedly until >Sleep Timer > appears.
>Sleep Timer >
030 min.
5 Press the Z key and display >>Sleep Mode.
>>Sleep Mode
On
