HP FS-8000C manual Indicators in Message Display, Error codes, Interface Indicator Interface, OP1

	3.1 Understanding the Operator Panel
Message	Meaning
Please wait	The color calibration function is being performed automati-
(Calibrating)	cally as you powered on the printer.
	You can also execute this function manually on the operator
	panel. For details, see Section 3.11.4 Color Calibration on
	page 3-100.
Ready	The printer is ready to print.
Processing	The printer is receiving data to print. This is also shown when
	the printer is reading a memory card or hard disk.
Sleeping	The printer is in sleep mode. The printer wakes from sleep
	mode whenever a key on the operator panel is pressed, the
	cover is opened or closed, or a print job is received. The printer
	then warms up and goes on-line. For details on sleep mode, see
	Section Sleep Timer Timeout Time on page 3-107.
Cancelling data	Jobs inside the printer are being canceled. To cancel a job, see
	Section 3.1.3 Keys on page 3-6 .
Waiting	The printer is waiting for the rest of print job before complet-
	ing the last page. Pressing the GO key allows you to obtain the
	last page immediately. See below.
FormFeed TimeOut	The printer is printing the last page after a waiting period.
Table 3-1 (Continued)

Error codes

See Chapter 5 Troubleshooting.

3.1.2Indicators in Message Display

Figure 3-2

Interface Indicator (INTERFACE)

The interface indicator shows the interface that is currently in use:

PAR	Parallel interface is in use.
SER	Serial (RS-232C) interface is in use.
OP1 (2)	Network interface is in use.

---No interface is in use.

Each interface has a timeout time of 30 seconds during which the other interface should wait to receive a print job. Even a print job has been complete on the interface, you should wait for this period until the other interface begins printing the job.

3-3