1.2 Parts and Functions
8Fuser Unit
The fuser unit fixes the toner permanently on the paper. The fuser becomes very hot during printing.
9Paper Feed Unit
The paper feed unit transports paper from the paper source for developing and fixing images.
10Separation Charger Cleaning Knob
This cleaning knob (green) is used to clean the separation charger. The separation charger unit must be replaced after every 100,000 pages of printing and requires professional servicing. Contact your Kyocera Mita dealer.
11Primary Transfer Unit
This unit is used to create the image developed by toner and to transfer it onto the surface of the paper.
1.2.3Rear
Figure
1Vents
Air is purged through these vents to cool down the inside.
2Parallel Interface Connector
This connector is for a standard Centronics parallel interface cable from the computer. Connect this connector to the computer’s parallel port.
3Paper Feeder Side Cover
This cover is opened to clear paper jams in the paper feeder section.
