HP FS-8000C manual Received Data Dump, Sleep Timer 03 0min, Print HEX-DUMP?

3.13 Other Modes

5	To change the timeout time, press the ENTER key. A blinking cursor (_) appears.
		>Sleep Timer >
		030min.
6	Press the U or V key to increase or decrease the value at the blinking cursor and set
	the desired time. The timer can be set between 5 and 240 min, in 5-minute increments.

Use the Z and Y keys to move the cursor right and left.

7

8

When the desired timeout time is displayed, press the ENTER key.

To exit the menu selection, press the MENU key.

3.13.4Received Data Dump

You can print data received by the printer as hexadecimal code for debugging programs and files.

1

2

3

Press the MENU key.

Press the U or V key repeatedly until Others > appears.

Others >

Press the Z key.

4

5

Press the U or V key repeatedly until > Print HEX-DUMPappears.

>Print HEX-DUMP

Press the ENTER key. A question mark (?) appears.

>Print HEX-DUMP?

3-108