HP FS-8000C manual Toner Kits, TK-82C Cyan TK-82M Magenta TK-82Y Yellow TK-82K Black

6.1 Toner Container Replacement

6.1.2Toner Kits

It is strongly recommended to use the new Kyocera Mita TK-82 Toner Kit supplied from

Kyocera Mita to prevent printer troubles and ensure a long printer life.

The TK-82 Toner Kits are supplied in each of the following four colors. The letter following

TK-82 describes the color of toner included in the container as follows:

TK-82C Cyan

TK-82M Magenta

TK-82Y Yellow

TK-82K Black

A new TK-82 toner kit for each color contains the following items:

•Toner Container

•Cleaning cloth

•Grid cleaner for main charger cleaning

•Plastic waste bags for old toner container and old waste toner bottle

•Waste toner bottle

•Installation Guide

Do not remove the toner container from the carton until you are ready to install it in the printer.

Note

6.1.3Understanding Messages Requesting Toner Container Replacement

The printer displays messages for individual colors at two stages of toner usage. This message is automatically alternated with the other printer message (such as Ready):

•When the printer becomes low on toner, for example in the cyan container, the printer displays the message Toner low TK-82Cas the first caution. Note the replacement is not always necessary at this stage.

•If you ignore the above message and continue printing, the printer displays the message Replace Toner/Clean printer — just before the toner is used up. The toner container must be replaced immediately. After the replacement is finished, the massage automatically changes to Clean printer Press GO. Clean the separate charger wires, etc. After the cleaning is finished, however, the message does not automatically change to Ready. To restart printing, you must press the GO key and make the printer ready.

In either case, to replace the toner container, see Section 6.1.4 Replacing the Toner Container on page 6-4.

6-3