HP FS-8000C manual Topmost to 3 bottom as displayed in place of #

5.3 Error Messages

	Message	Corrective Action
Option stacker		The optional bulk stacker, document finisher, or sorter is not installed
path error		properly. Correct the installation.
Option tray ##		A tray of the optional document finisher (DF-31) or sorter (SO-30) is full.
paper full		Remove paper sheets in the corresponding tray as displayed in place of ##.
Paper feeder #		The side cover of paper feeder is open. Close the cover of the paper feeder
side cover open		1 (topmost) to 3 (bottom) as displayed in place of #.
Paper jam		A paper jam has occurred. The location of the paper jam is indicated in
###############		place of the #’s. For details, see Section 5.4 Clearing Paper Jams on page
		5-13.
Paper loading		After the paper cassette is closed, papaer loading is in progress in the paper
		cassette.
Print overrun†††		The print job transferred to the printer was too complex to print on a page.
Press GO		Press the GO key to resume printing. (The page may break in some
		pages.).
		You can abandon printing by the CANCEL key.
		If Auto Continue is set to On, printing will be automatically resumed after
		a preset period of time.
RAM disk error##		A RAM disk error has occurred. Look at the error code given in place of ##
Press GO		and refer to Section 5.3.2 Storage Error Codes on page 5-11 . To ignore the
		RAM disk error, press the GO key.
Remove paper		Paper remains in an option document finisher or sorter tray as displayed in
option tray ##		place of ##. Remove paper sheets.
Replace toner		Two message items are displayed alternately. Toner has run out in the toner
Clean printer		container(s). Replace the toner container using a new toner kit for the par-
		ticular color. The printer does not operate when this message is displayed.
		For example, if Replace toner C,K is displayed, replace the cyan and
Replace toner		the black toner containers.
TK-82 #######
Set paper		The MP tray is out of paper. Load paper and press the GO key. (Note that
Press GO		feeding the paper having a paper size which does not match the current
		paper size from the MP tray can cause paper jam.)
Side cover		Open the side cover at the printer’s left side, then close tightly.
open
Toner low		Replace the toner container using a new toner kit. Color of the toner con-
TK-82 #######		tainer that needs to be replaced is represented by #######: C (Cyan), Y
		(Yellow), M (Magenta), and K (black).
Unsupported		A device not supported by the printer is installed. Install an optional bulk
external device		stacker supported by the printer.
Virtual mail box		The storage area in the hard disk for the virtual mailboxes is full. Print out
full		accumulated jobs in the virtual mailboxes.
Warning		The printer’s internal memory is running low due to too many numbers of
low memory		fonts and macros downloaded. Try deleting unnecessary fonts and macros.

Table 5-3 (Continued)

†These messages may be displayed altogether such as Install MK [A][B][C][D]

or Install MK [A2][B][C][D].

††Messages separated by ‘/’ are displayed alternately.

†††After this error has happened, page protect mode will be automatically turned on. To maintain optimum use of memory during printing, we recommend you manually turn off page protect mode. See Chapter 3 Using the Operator Panel, section 3.7.3 Page Pro- tect Mode on page 3-60.

5-10