HP FS-8000C manual Printer Resetting, Processing Waiting

	3.13 Other Modes
6	Press the ENTER key again. The message Processing appears for a second,
	followed by Waiting.

Processing

Waiting

7	While the message display is indicating Waiting (for 30 seconds by default), send
	data to be hex-dumped to the printer. The message display indicates Processing
	while the data is being received.
	You can cancel printing of any more dump data by pressing the GO key and then the
	CANCEL key.
8	Once all data has been received, the message Waiting will appear. Press the GO key
	to finish hex-dump printing.

3.13.5 Printer Resetting

The procedure described below resets the printer’s temporary conditions, such as the current unit of measurement, page orientation, font, character code set, margins, etc., set by commands to their default values. Downloaded fonts and macros are deleted from the printer’s memory.

1

2

Press the MENU key.

Press the U or V key repeatedly until Others > appears.

Others >

3 Press the Z key.

4 Press the U or V key repeatedly until >Printer Reset appears.

3-109