HP FS-8000C manual Color Control, Selecting Monochrome or Color Printing, Color Mode ? Color

3.11 Color Control

3.11Color Control

This section covers how to use the operator panel for controlling parameters pertaining to color printing.

3.11.1Selecting Monochrome or Color Printing

You can use the Color Mode menu on the operator panel to select the Monochrome or Color printing mode. It also allows you to perform adjustments on color. The Color Mode menu has the following sub-menus:

•RGB simulation

Prints using colors close to those projected on a monitor.

•Ink simulation

Used for setting the type of colors to be used, such as SWOP. Ink simulation can be used only when KPDL and KPDL(AUTO) is chosen as the emulation.

•Color calibration

Executes manually the color calibration System for the optional color reproduction performance.

Selecting Monochrome or Color Printing

By default, the printer is set to print in color mode. To change it to monochrome mode, proceed as follows:

1

2

3

Color Mode >

Color

Press the the MENU key.

Press the U or V key repeatedly until Color Mode appears. The current color mode appear under Color Mode.

To change color mode, press the ENTER key. A blinking question mark (?) appears.

Color Mode

? Color

4 Press the U or V key to change color mode — Monochrome or Color.

3-97