Honda Power Equipment metro 21 manual Run the engine to warm the oil

Page 37

G0227

Oil Filter

 

Fuel Line

 

 

 

 

 

 

 

 

Figure 28

1. Run the engine to warm the oil.

WARNING

POTENTIAL HAZARD

♦Oil may be hot after engine has been run.

WHAT CAN HAPPEN

♦Contact with hot oil can cause severe personal injury.

HOW TO AVOID THE HAZARD

♦Avoid contacting the hot engine oil when you drain it.

2.Stop the engine and wait for all moving parts to stop.

3.Disconnect the wire from the spark plug (Fig. 5 & 7).

4.Drain the engine oil.

5.Place a rag under the oil filter to catch any oil that may leak out as you remove the filter.

6.Remove the oil filter.

7.Use your finger to coat the gasket on the new filter with clean engine oil.

Gasket

G0228

Figure 29

8.Install the new filter and hand tighten it 2/3 turn only.

9.Fill the crankcase to the Full line on the dipstick with fresh oil.

10.Connect the wire to the spark plug.

11.Run the engine for about 3 minutes.

12.Stop the engine, wait for all moving parts to stop, and check for oil leakage around the filter.

13.Add oil to compensate for the oil in the oil filter.

-32 -

Page 36 Page 38
Image 37
Page 36 Page 38
Contents MFG. CO. INC Potential Hazard Exmark Parts PLUS→ Program Operators Manual Table of Contents Training Safety Alert SymbolPreparation Carbon monoxide can kill you Potential Hazard Potential Hazard Operation Potential Hazard Maintenance and Storage Safety Signs Page Dimensions Safety Interlock SystemModel Number EngineSelf-Propel Drive Bail For Self-Propelled units only PRE-START Kawasaki Engines Only Honda Engines OnlyKawasaki Units Only Operating Instructions12.7 cm Contact with the blade could occur, causing serious injury Cutting Heights Mowing with the Grass Bag Potential Hazard Page Recommended Maintenance Schedule MaintenanceWashing Method For Kawasaki EnginesScraping Method Cover Foam PRE-CLEANER Paper AIR Filter AIR Filter Base For Honda Units Accelerator Worn or damaged blade can break Belt Cover BBC Shield Tabs and Nuts Tab and Bolt Grease Fitting Oil may be hot after engine has been run Run the engine to warm the oil Lubricating the Gear Case Self-Propelled Units Only Storage Potential Hazard Accessories TroubleshootingCorrective Action For units purchased on or after October 1 Year Limited Warranty Exmark Turf EquipmentPage Page Page Date Description of Work Done Check us out on the Web See EXMARK’S Complete Line of Accessories

metro 21 specifications

Honda Power Equipment has made a significant mark in the outdoor power equipment industry, particularly with its innovative offering—the Honda Metro 21. This versatile piece of machinery has gained a reputation for its efficiency, durability, and user-friendly design, making it a preferred choice for both professional landscapers and homeowners alike.

At the heart of the Metro 21 is its powerful Honda engine, renowned for reliability and performance. This machine is equipped with a premium, fuel-efficient 4-stroke engine that not only minimizes emissions but also maximizes performance, allowing users to tackle the most demanding mowing tasks with ease. The engine's design ensures smooth operation, reducing vibrations and noise, making for a more pleasant mowing experience.

One of the standout features of the Metro 21 is its cutting system. The dual-blade design enhances grass cutting efficiency, producing a fine mulch that helps to nourish the lawn. This system is designed for precision, offering adjustable cutting heights that range from 1 inch to 4 inches. Users can easily customize their mowing experience based on the type of grass and lawn conditions, ensuring optimal results every time.

Additionally, the Honda Metro 21 showcases advanced technologies aimed at enhancing usability. The machine features a self-propelled drive system, making it easier to maneuver across the lawn, especially on sloped terrain. The adjustable speed settings allow for tailored movement, adapting to the operator's pace and ensuring comfort during extended use.

Durability is another key characteristic of the Metro 21. Its robust construction is built to withstand the rigors of regular use, featuring a rugged steel deck that resists dents and corrosion. This reliability is further enhanced by the easy-access air filter and oil drain, simplifying maintenance and ensuring the machine remains in top condition year-round.

User comfort has also been considered in the design of the Metro 21. Its ergonomic handle can be adjusted for height, accommodating operators of various sizes and reducing fatigue during long periods of use. The quick-release folding handle allows for compact storage and easy transport, making this machine a convenient choice for homeowners with limited storage space.

In summary, the Honda Power Equipment Metro 21 combines power, efficiency, and user-friendly features, making it an excellent choice for those looking to maintain a beautifully manicured lawn. Whether for residential or commercial use, this machine stands out as a reliable and innovative solution for outdoor mowing needs.
Top Page Image Contents