Honda Power Equipment HRB216TXA Oxygenated Fuels, Ethanol -- ethyl or grain alcohol 10% by volume

Page 60

TECHNICAL & CONSUMER INFORMATION

Oxygenated Fuels

Some conventional gasolines are being blended with alcohol or an ether compound. These gasolines are collectively referred to as oxygenated fuels. To meet clean air standards, some areas of the United States and Canada use oxygenated fuels to help reduce emissions.

If you use an oxygenated fuel, be sure it is unleaded and meets the minimum octane rating requirement.

Before using an oxygenated fuel, try to confirm the fuel's contents. Some states/provinces require this information to be posted on the pump.

The following are the EPA-approved percentages of oxygenates:

ETHANOL —— (ethyl or grain alcohol) 10% by volume

You may use gasoline containing up to 10% ethanol by volume. Gasoline containing ethanol may be marketed under the name “Gasohol”.

MTBE ———— (Methyl Tertiary Butyl Ether) 15% by volume

You may use gasoline containing up to 15% MTBE by volume.

METHANOL — (methyl or wood alcohol) 5% by volume

You may use gasoline containing up to 5% methanol by volume, as long as it also contains cosolvents and corrosion inhibitors to protect the fuel system.

Gasoline containing more than 5% methanol by volume may cause starting and/or performance problems. It may also damage metal, rubber, and plastic parts of your fuel system.

Fuel system damage or performance problems resulting from the use of an oxygenated fuel containing more than the percentages of oxygenates mentioned above are not covered under warranty.

58

Page 59 Page 61
Image 60
Page 59 Page 61
Contents Rotary Mower Page Introduction FEW Words about Safety IntroductionContents Lawn Mower Safety Important Safety InformationLawn Mower Safety Operating Near RoadsOperator Responsibility Safety Label Locations Controls & Features Component & Control LocationsControls & Features Fuel Valve Throttle LeverBlade Control Lever Drive Clutch LeverCutting Height Adjustment Levers Shift LeverTX gear transmission HX hydrostatic transmissionBefore Operation Are YOU Ready to GET STARTED?Is Your Lawn Mower Ready to GO? Before Operation Check Your Work AreaHandlebar Height Adjustment GET the Mower ReadyMulching Plug Installation Grass BagInspection RemovalCutting Height Move it into another notchMowing Precautions OperationStarting the Engine Operation Operating the Controls for Mowing Blade Control Lever Drive Clutch Lever Shift Lever TXA Slow Fast Stopping the Engine Safe Mowing Practices SlopesObstacles Gravel and Loose ObjectsWhen to Mow Mowing TipsCutting Width Blade Speed Blade SharpnessDry Grass Wet GrassMowing Patterns MulchingBagging Side-Discharge MowingImportance of Maintenance Servicing Your Honda Lawn MowerMaintenance Safety Servicing Your Honda Lawn MowerMaintenance Schedule PeriodBlades InspectionCracked, or otherwise Damaged must beBlade Removal and Installation Blade RemovalBlade Installation Blade bolt torque 36 ~ 43 ft-lb 5.0 ~ 6.0 kg-m 49 ~ 59 N·mEngine Maintenance Engine Oil ChangeEngine Oil Level Check Engine Oil RecommendationsAir Cleaner Service Spark Plug Service Incorrect spark plugs can cause engine damageInstall the spark plug cap on the spark plug Fuel Fuel InformationFuel Tank CAP Filler Neck Control Cable Adjustments Blade Control Lever AdjustmentDrive Clutch Cable Adjustment TXA gear transmission HXA hydrostatic transmission Shift Cable Adjustment SXA gear transmission Throttle Cable Inspection Grass BAG Cleaning and Replacement Grass Bag CleaningGrass Bag Replacement Bag InstallationStorage Storage PreparationEngine Mower DeckStorage Fuel Adding a Fuel StabilizerDraining the Carburetor and Fuel Tank Engine OilEngine Cylinder Handlebar FoldingPlacing in Storage Removing from StorageTransporting Before LoadingTaking Care of Unexpected Problems Engine ProblemsTaking Care of Unexpected Problems Vibration ProblemsMowing and Bagging Problems Technical Information Serial NumbersCarburetor Modification for High Altitude Operation Spark Arrester Service optional equipment Technical & Consumer InformationEthanol -- ethyl or grain alcohol 10% by volume Mtbe ---- Methyl Tertiary Butyl Ether 15% by volumeMethanol methyl or wood alcohol 5% by volume Oxygenated FuelsU.S. and California Clean Air Act Problems That May Affect EmissionsEmission Control System Source of EmissionsAir Index Descriptive Term Applicable to Emissions Durability PeriodReplacement Parts MaintenanceSpecifications Dimensions, Weights and CapacitiesMower Model Engine Design and PerformanceTransmission Design and Performance TuneupConsumer Information Find an Authorized Honda Servicing Dealer in Your AreaHonda Publications +1,&$/&216805,1250$7,21 Distributors Limited Warranty Products Covered by Length of Warranty This WarrantyEmission Control System Warranty Your Warranty Rights And Obligations CaliforniaWarranty Coverage Exclusions Warranty Service Information Index Bag. See Grass BagIndex DefinitionsQuick Reference Information EM3

HRB216TXA specifications

The Honda Power Equipment HRB216TXA is a standout in the lawn maintenance industry, designed for homeowners and professionals seeking efficiency, durability, and performance. This self-propelled lawn mower combines innovative technology with user-centric features to deliver an exceptional mowing experience.

One of the key features of the HRB216TXA is its powerful Honda GCV160 engine. Known for its reliability and fuel efficiency, this engine provides robust performance, enabling users to tackle both small and large lawns with ease. The engine is equipped with an auto-choke system, simplifying the starting process—just pull the cord and the mower is ready to go.

The HRB216TXA boasts a 21-inch cutting deck, suitable for efficiently cutting grass in various conditions. Made from durable steel, the cutting deck is not only lightweight but also resistant to corrosion and impact. Users have the option to adjust the cutting height with a single lever, providing six different height positions ranging from 3/4 inch to 4 inches to achieve the perfect lawn height.

Another prominent feature of the HRB216TXA is the MicroCut twin-blade system. This innovative technology utilizes two blades to create finer grass clippings, which enhance mulching capabilities and improve lawn health. The grass clippings can be easily collected in the large 2.5-bushel grass bag, making disposal simple and efficient.

The self-propelled drive system provides excellent maneuverability, allowing users to navigate through tight spaces and around obstacles without straining. The mower has variable speed control, ensuring that users can adjust their pace according to their comfort and the terrain being mowed.

Comfort is a significant consideration in the HRB216TXA's design. It features a comfortable handlebar that can be easily adjusted for height, catering to various user preferences. The foldable handle allows for compact storage, a practical solution for those with limited garage space.

In summary, the Honda Power Equipment HRB216TXA combines a powerful engine, customizable cutting options, and innovative features to provide an unparalleled lawn care solution. Its robust construction, efficient systems, and user-friendly design make it an ideal choice for those seeking top-notch performance in their lawn maintenance routine.
Top Page Image Contents