Honda Power Equipment HRB216TXA owner manual Grass Bag, Inspection, Installation, Removal

BEFORE OPERATION

Grass Bag

A lawn mower works like a vacuum cleaner; it blows air through the bag, which traps the grass clippings. Always empty the grass bag before it becomes filled to the limit of its capacity. Bagging performance will diminish after the bag becomes about 90% filled. Also, the bag is easier to empty when it is not packed full.

Inspection

Inspect the grass bag for tears, holes, and excessive wear. The grass bag wears during normal use and will eventually require replacement. Grass bag replacement is explained on page 46.

Installation

1.Raise the discharge guard, Remove the mulching plug if it is installed. Hook the grass bag onto the mower deck as shown.

2.Release the discharge guard to secure the grass bag.

Removal

1.Raise the discharge guard, grasp the grass bag handle and remove the grass bag.

2.Release the discharge guard.

3.When the grass bag is clear of the discharge guard, you can lift it through the handlebar opening, or you can remove it to the rear of the mower below the handlebar.

DISCHARGE GUARD

GRASS BAG

HANDLE

BAG

15