Honda Power Equipment HRR216VKA Blade Drive Belt Tension Adjustment, Starter Switch Wiring

Page 11

17

MAINTENANCE continued

6. With the guides loose slip the blade drive belt(29) out of the groove

Blade Drive Belt

on the drive pulley and down past the pulley. Note: It is necessary to

remove the transaxle drive belt(10) from its groove to allow removal of

the blade drive belt.

7. Pull the belt back through the hole in the top of the engine base

and remove it from the machine. NOTE: Removal of the belt from the

blade drive pulley requires some force to walk the belt past the front

portion of the pulley.

8. Install new belt into groove on blade drive pulley. Push remaining

length of belt back through engine base toward clutch/brake drive

pulley.

9. Reach through from rear of machine and pull new belt through and

install it in the groove on the clutch/brake drive pulley. NOTE: Make

sure the blade belt is properly seated in the clutch/brake drive

pulley(Item 23) and not resting in the gap between the clutch/brake

pulley(23) and the transaxle drive pulley(46)

10. Tighten four screws to secure belt guides (item 149 & 150) in

place. NOTE: Be sure belt is correctly routed when replacing. (See

Fig. 3)

11. Set tension on belt by reaching in through top of engine base with

a long screwdriver or other pry bar and pushing the idler pulley over

against the belt to increase tension. While holding the belt under

tension tighten the two screws (107) that hold the idler arm in place.

Note: Proper belt tension can be verified by checking the tight side

(non-idler side)belt deflection. The belt should deflect 3/16”-1/4” with

force applied perpendicular to the belt after tensioning.

12. Replace engine base door (item 7) and tighten screws to hold it in

place

13. Reconnect spark plug.

Belt in top groove of engine pulley

Transaxle

Drive Belt Belt in bottom groove of engine pulley

BLADE DRIVE BELT TENSION ADJUSTMENT

1.Disconnect spark plug wire.

2.Remove the two screws holding the engine base door (item 7), and remove the door.

3.Examine the condition of the belt and note the position of the idler assembly and the amount of tension on the blade belt.

3.Loosen the two nuts (Item 117) on top of the engine base, holding the idler arm assembly (Item 26) in place .

4.Reset tension on belt by reaching in through top of engine base with a long screwdriver or other pry bar and pushing the idler pulley over against the belt to increase tension. While holding the belt under tension tighten the two screws that hold the idler arm in place.

5.Replace engine base door and verify blade belt tension setting by operating the unit in the conditions that caused it to slip originally.NOTE: If belt continues to slip it may be worn out and require replacement before proper operation can resume.

STARTER SWITCH WIRING

Fig. 3

Maintenance Schedule

 

Follow these hourly

 

maintenance intervals.

Maintenance Operation

Every

Every 5 hrs

Every 25

Every 50

 

 

 

 

Use

or (Daily)

hrs

hrs

 

 

 

Engine (See Engine Manual)

Check for excessive vibration

Inspect for loose parts

Inspect for worn or damaged parts

Sharpen Blade

Inspect belts for wear

Check blade clutch cable tension

Replace blade and traction belts

Inspect battery for damage or leak

Check battery terminal for corrosion

Lubricate throttle control cable and linkage.

MAINTENANCE HISTORY

Date of Service

ServicePerformed

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Part No. 500264

Page 11 of 12

Form No. F101001A

Image 11
Contents Belt Blade Drive NUT Replacement KITBlade BC2401 Belt Traction Drive8VIBRATION SoundDisconnect Spark Plug Wire Before Assembling Unit General SafetyControls Literature Assy P/NInstruction Labels Engine LabelsBlade Clutch StartingCutting Operation Clearing a Clogged Cutting DeckParts Drawing Partslist Parts List From Storage Cutting Height AdjustmentPropulsion Handling & TransportingBlade Removal / Sharpening Belt ReplacementStarter Switch Wiring Blade Drive Belt Tension AdjustmentTroubleshooting Clutch Adjustment

HRR216VKA, BC2401IC, BC2401HE specifications

Honda Power Equipment has long been synonymous with reliability, performance, and innovation. Among its impressive lineup, the BC2401HE, BC2401IC, and HRR216VKA models stand out for their exceptional features and technologies designed to enhance user experience.

Starting with the BC2401HE, this versatile string trimmer boasts an efficient four-stroke engine that delivers impressive power without the need for mixing fuel and oil. This model is equipped with a lightweight design, making it easy to handle even in tight spaces. The dual-line cutting system with a rapid reload feature allows for quick and easy line changes, ensuring that users can get back to work without unnecessary downtime. Additionally, the BC2401HE is designed with a low vibration system, which minimizes fatigue during extended use, making it ideal for both professional landscapers and homeowners alike.

Turning to the BC2401IC, this model offers many of the same robust features as the BC2401HE, with a focus on increased productivity. It incorporates Honda’s innovative easy start technology, meaning users can quickly get their trimmer running with minimal effort. This model also features a durable, forged aluminum shaft, ensuring longevity and resistance to wear and tear. The BC2401IC is highly regarded for its fuel efficiency, allowing users to maximize their operational time without frequent refills.

The HRR216VKA, a standout among lawn mowers, combines Honda’s cutting-edge technologies with user-friendly features. This self-propelled mower is powered by a reliable Honda GCV160 engine, providing robust cutting power while maintaining exceptional fuel efficiency. With a 21-inch cutting deck and versatile cutting heights, the HRR216VKA allows users to tackle various lawn conditions and preferences with ease.

Another significant feature of the HRR216VKA is its Versamow System, which allows for mulching, bagging, and discharging clippings without the need for additional tools or the hassle of swapping out components. The mower’s Auto Choke System ensures easy start-up without the need for priming, making it accessible for all users regardless of experience level. The ergonomic handle design enhances comfort, while the durable construction ensures that this mower is built to last, even with regular use.

In summary, Honda’s BC2401HE, BC2401IC, and HRR216VKA models exemplify the brand’s commitment to quality, innovation, and user satisfaction. With their advanced technologies, fuel efficiency, and user-friendly features, these power equipment solutions cater to a wide range of outdoor maintenance needs, making them indispensable tools for both residential and commercial users. With Honda, customers can trust they are investing in equipment that delivers outstanding performance day in and day out.