General Safety | Honda Power Equipment BC2401HE, BC2401IC, HRR216VKA

9GENERAL SAFETY

For your safety and the safety of others, these directions should be followed:

Do not operate this machine without first reading owner's manual and engine manufacturer's manual.

Use of Ear Protection is recommended while

operating this machine.

Use of Eye and Breathing protection is recom- mended when using this machine.

·DO NOT place hands or feet beneath cutting deck, near debris outlet or near any moving parts.

·DO NOT start engine or operate unit with bystanders in or near the work area.

·DO NOT start or operate machine with blade or drive clutch engaged.

·DO NOT operate during excessive vibration.

·DO NOT perform any maintenance or inspection until engine has been turned off and has come to a complete stop, and the spark plug has been removed

·DO NOT operate machine with guards removed.

·DO NOT use this machine for cutting areas containing rock, glass, string like material, wire, rags, cans, metal, or other non- organicmaterial.

·DO NOT operate this machine on slopes greater than specified on page 1.

·DO NOT operate machine near any hot or burning debris, or any toxic or explosive material.

·DO NOT allow children to operate this equipment.

10ASSEMBLY

Read all safety and operating instructions before assembling or starting this unit.

PUT OIL IN ENGINE BEFORE STARTING.

DISCONNECT SPARK PLUG WIRE

BEFORE ASSEMBLING UNIT.

Your Billy Goat Brush Cutter is shipped from the factory in one carton, completely assembled except for the upper handle, and front guard bar.

1.REMOVE unit from carton and allow upper handle (item 40) to lay on ground behind unit. Set guard bar(Item 31) to the side for now.

2.REMOVE hardware items 115, 117, 141, 143, & 144 from temporary storage positions on lower handle (items 51, & 52).

3.ATTACH upper handle to lower as shown below, and securely tighten all fasteners. For easy alignment of handles during installation, loosen the four screws that secure the lower handles. Line up and hand tighten all handle hardware before final tightening. Note: Be sure the engine starter rope is properly installed in the starter rope guide (item 145) before tightening the corresponding fasteners.

4.REMOVE hardware items 102, 103, 117, 119, 124, 141, & 152 from temporary storage positions on deck and skid assy at front of unit (items 2, 155, & 156)

5.ATTACH guard bar(Item 31) to deck as shown below. Install the center bolts(Item 153) first, and install the bolts that fasten through the sides of the deck last. Securely tighten all fasteners. Note: Hardware items 117, 119, & 141 are used to secure both the front skid attachment and the sides of the guard bar. Be sure both are securely attached.

6.CONNECT spark plug wire to spark plug.

11PACKING CHECKLIST

These items should be included in your carton. If any of these parts are missing, contact your dealer.

Literature

Assy

Engine Manual

Per Model

Handle Upper Assembly 500256

Bar Support WA 500235

Literature Assy 500263

Briggs & Stratton

Honda(English)

HondaW/Electric

Start (English)

Part No. 500264

Page 3 of 12

Form No. F101001A

HRR216VKA, BC2401IC, BC2401HE specifications

Honda Power Equipment has long been synonymous with reliability, performance, and innovation. Among its impressive lineup, the BC2401HE, BC2401IC, and HRR216VKA models stand out for their exceptional features and technologies designed to enhance user experience.

Starting with the BC2401HE, this versatile string trimmer boasts an efficient four-stroke engine that delivers impressive power without the need for mixing fuel and oil. This model is equipped with a lightweight design, making it easy to handle even in tight spaces. The dual-line cutting system with a rapid reload feature allows for quick and easy line changes, ensuring that users can get back to work without unnecessary downtime. Additionally, the BC2401HE is designed with a low vibration system, which minimizes fatigue during extended use, making it ideal for both professional landscapers and homeowners alike.

Turning to the BC2401IC, this model offers many of the same robust features as the BC2401HE, with a focus on increased productivity. It incorporates Honda’s innovative easy start technology, meaning users can quickly get their trimmer running with minimal effort. This model also features a durable, forged aluminum shaft, ensuring longevity and resistance to wear and tear. The BC2401IC is highly regarded for its fuel efficiency, allowing users to maximize their operational time without frequent refills.

The HRR216VKA, a standout among lawn mowers, combines Honda’s cutting-edge technologies with user-friendly features. This self-propelled mower is powered by a reliable Honda GCV160 engine, providing robust cutting power while maintaining exceptional fuel efficiency. With a 21-inch cutting deck and versatile cutting heights, the HRR216VKA allows users to tackle various lawn conditions and preferences with ease.

Another significant feature of the HRR216VKA is its Versamow System, which allows for mulching, bagging, and discharging clippings without the need for additional tools or the hassle of swapping out components. The mower’s Auto Choke System ensures easy start-up without the need for priming, making it accessible for all users regardless of experience level. The ergonomic handle design enhances comfort, while the durable construction ensures that this mower is built to last, even with regular use.

In summary, Honda’s BC2401HE, BC2401IC, and HRR216VKA models exemplify the brand’s commitment to quality, innovation, and user satisfaction. With their advanced technologies, fuel efficiency, and user-friendly features, these power equipment solutions cater to a wide range of outdoor maintenance needs, making them indispensable tools for both residential and commercial users. With Honda, customers can trust they are investing in equipment that delivers outstanding performance day in and day out.