S6065A2001
S6065A1003
GENERAL
The S6065A1003 and S6065A2001 Liquid Flow Switches are designed for monitoring flow rates in pipes employed in HVAC applications. They are suitable for monitoring flow in water, oil, cooling circuits, and lubrication systems. The S6065A2001 is designed for monitoring aggressive liquids.
See Table 1 for the reset and switch points for water. Data for other media must be determined empirically.
S6065A1003/2001
LIQUID FLOW SWITCHES
SPECIFICATION DATA & MOUNTING INSTRUCTIONS
FEATURES
•
•
•A single type suitable for pipes with a diameter of 1 to 8".
COMMON SPECIFICATIONS
Switching capacity | 15 (8) A, 24...250 Vac |
Lifetime | 50000 cycles at nominal load |
Working temperature | |
| |
Electrical connection | Screw terminal, wire up to 1.5 mm2 |
| cable ∅ 6...9 mm |
Protection class | I according to EN60730 |
Protection standard | IP65 according to EN60529 |
Housing material | ABS and |
Accessories | PA2 Paddle set |
MOUNTING
The S6065A1003 and S6065A2001 Liquid Flow Switches can be mounted in any desired position far from elbows, valves, and filters.
NOTE: The arrow on the housing must point downstream. When using multiple paddles, the paddles must be arranged in order of decreasing length downstream, i.e. with the longest paddle facing the oncoming liquid.
In the case of vertical pipes, reset the range to balance the paddle weight. To prevent malfunction caused by impurities in the medium, do not mount the device with the housing pointing downwards.
MODELS
Specification | S6065A1003 |
Flow medium | |
Mounting | Rp 1" (ISO7/1) |
Maximum pipe temperature | 120 °C |
Pressure | 11 bar |
Paddle material | 1.4401 |
Lever | yellow brass |
Sensor body | yellow brass |
Housing dimensions | 113 x 70 x 65 mm |
Weight | 850 g |
Approvals |
S6065A2001
aggressive liquid Rp 1" (ISO7/1)
120°C
30bar 1.4401 1.4404 1.4404
108x 70 x 72 mm
850g
® U.S. Registered Trademark |
|
|
|
|
| |
Copyright © 2008 Honeywell Inc. • All rights reserved |
|
|
|
|
|
|
|
|
|
|
|
|
|