Harbor Freight Tools 91959 manual Left Side View to Lower Right Side View to Raise, Figure C

Page 10

(to a maximum 11” deep). To do so, remove the two Cotter Pins (39). Remove the two Pin Shafts (38). Raise or lower the Depth Skid (57) to obtain the desired tilling depth. Then, replace the Pin Shafts and Cotter Pins. (See Figure C.)

LEFT SIDE VIEW (TO LOWER)

RIGHT SIDE VIEW (TO RAISE)

 

 

 

 

DEPTH SKID (57)

DEPTH SKID (57)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

COTTER PIN (39)

 

 

 

 

 

COTTER PIN (39)

 

 

 

 

PIN SHAFT (38)

 

 

 

 

 

 

 

 

 

 

 

 

PIN SHAFT (38)

 

 

 

 

 

 

 

 

 

FIGURE C

3.Open the Fuel Valve on the Engine.

4.Turn the Choke Lever on the Engine to its “CHOKE” position.

5.Set the Throttle Control (71) to its “FAST” position. (See Figure D, next page.)

6.Hold the Start Handle of the Engine loosely and pull it slowly several times to allow the gasoline to flow into the Engine’s carburetor. Then hold the Start Handle firmly and pull the rope hard and fast. Pull the rope all the way out, using two hands if necessary. If necessary, pull the rope several times until the Engine starts.

7.Allow the Engine to run for several seconds. Then, turn the Choke Lever to its “RUN” position.

8.Adjust the Throttle Control (71) to the desired speed at which the Cultivator will move. (See Figure D.)

9.Grip the Upper Handle (66) firmly with both hands. (See Figure D.)

10.Squeeze down on the Clutch Handle (73) to rotate the Tines (37, 50, 40) and move the Cultivator in a FORWARD direction. (See Figure D.)

11.Slowly push the Cultivator while guiding the tool in the desired forward direction.

SKU 91959

For technical questions please call 1-800-444-3353

PAGE 10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents For technical questions or replacement parts, please call Rotary CultivatorUnpacking Product SpecificationsGeneral Safety Precautions Save this ManualTool USE and Care Personal SafetyWork Area SKU For technical questions please callSpecific Safety Precautions ServiceFire and Explosion Precautions Mechanical Precautions Noise Precautions Burn and Chemical PrecautionsHeart Pacemaker Precautions OWNER/OPERATOR Precautions Assembly Instructions California Proposition 65 WarningsOperating Instructions See Figure BLeft Side View to Lower Right Side View to Raise Figure CINSPECTION, MAINTENANCE, and Cleaning Figure DPlease Read the Following Carefully Adjusting TheTiller TinesREV 11/05 SKU For technical questions please call Parts List DescriptionAssembly Diagram

91959 specifications

Harbor Freight Tools 91959 is a versatile and essential tool for both amateur DIY enthusiasts and professional tradespeople alike. Known for its reliability and affordability, this tool has become a go-to choice for those who seek efficient and effective solutions for various projects. The 91959 is primarily recognized as a 20-gallon vertical air compressor, designed to meet the demands of a wide range of applications, from powering pneumatic tools to inflating tires.

One of the main features of the Harbor Freight Tools 91959 is its powerful 1.5 horsepower motor. This motor efficiently drives the compressor, allowing it to reach a maximum pressure of 125 PSI, ensuring that you have ample power for tasks such as spray painting, nailing, and bolting. The compressor's 20-gallon tank provides an extended runtime, which is incredibly beneficial for projects requiring continuous air supply.

The 91959 also boasts a user-friendly design. It comes equipped with wheels and a handle, making it easy to transport around the job site or within a garage. This mobility is further enhanced by its compact vertical design, which saves space while still providing a significant air storage capacity.

In terms of technology, the Harbor Freight Tools 91959 features an oil-free pump. This characteristic ensures that maintenance is minimal, as it eliminates the need for regular oil changes. The oil-free operation also contributes to cleaner air output, making it a suitable choice for applications where clean air is crucial.

Another noteworthy aspect of the 91959 is its noise level. Operating at 68 decibels, it is relatively quiet compared to many other air compressors on the market, allowing for a more pleasant working environment without disturbing others nearby.

Safety features such as a thermal overload protector and a pressure relief valve are also included, promoting user safety during operation. These features help prevent overheating and excessive pressure buildup, ensuring a secure and reliable working experience.

In summary, the Harbor Freight Tools 91959 is a powerful, portable, and user-friendly air compressor that meets a variety of needs across multiple applications. With its impressive features, durable construction, and low-maintenance design, it stands as a valuable investment for anyone looking to enhance their toolbox with a reliable air compression solution.
Top Page Image Contents