Harbor Freight Tools 91959 manual INSPECTION, MAINTENANCE, and Cleaning, Figure D

Page 11

12.Always keep a safe distance away from the edges and banks of ditches and avoid any actions that might cause the Cultivator to topple over.

CLUTCH HANDLE (73)

UPPER HANDLE (66)

THROTTLE CONTROL (71)

FIGURE D

 

OUTER/INNER TINES

 

(37, 50, 40)

To Stop The Cultivator:

1.Release your grip on the Clutch Handle (73), and allow it to return to its “NEU- TRAL” position. (See Figure D.)

2.Turn the Throttle Control (71) to its “STOP” position.

3.Close the Fuel Valve on the Engine.

4.NOTE: Always park the Cultivator on a firm and level surface away from all flammable materials such as leaves, brush, weeds, etc.

INSPECTION, MAINTENANCE, AND CLEANING

1. CAUTION! Always make sure the Engine’s Throttle Control (71) is in its “STOP” position. Disconnect the spark plug wire from the Spark Plug. And allow sufficient time for the Engine to completely cool before performing any inspection, maintenance, or cleaning on the Cultivator and/or Engine.

2.Before each use, inspect the general condition of the Cultivator. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, and any other condition that may affect its safe operation. If a problem occurs, always have the Cultivator immediately checked out by a qualified service technician before further use. Do not use damaged equipment.

SKU 91959

For technical questions please call 1-800-444-3353

PAGE 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Rotary Cultivator For technical questions or replacement parts, please callSave this Manual Product SpecificationsGeneral Safety Precautions UnpackingSKU For technical questions please call Personal SafetyWork Area Tool USE and CareService Specific Safety PrecautionsFire and Explosion Precautions Mechanical Precautions Heart Pacemaker Precautions Burn and Chemical PrecautionsNoise Precautions California Proposition 65 Warnings OWNER/OPERATOR Precautions Assembly InstructionsSee Figure B Operating InstructionsFigure C Left Side View to Lower Right Side View to RaiseFigure D INSPECTION, MAINTENANCE, and CleaningREV 11/05 SKU For technical questions please call Adjusting TheTiller TinesPlease Read the Following Carefully Description Parts ListAssembly Diagram

91959 specifications

Harbor Freight Tools 91959 is a versatile and essential tool for both amateur DIY enthusiasts and professional tradespeople alike. Known for its reliability and affordability, this tool has become a go-to choice for those who seek efficient and effective solutions for various projects. The 91959 is primarily recognized as a 20-gallon vertical air compressor, designed to meet the demands of a wide range of applications, from powering pneumatic tools to inflating tires.

One of the main features of the Harbor Freight Tools 91959 is its powerful 1.5 horsepower motor. This motor efficiently drives the compressor, allowing it to reach a maximum pressure of 125 PSI, ensuring that you have ample power for tasks such as spray painting, nailing, and bolting. The compressor's 20-gallon tank provides an extended runtime, which is incredibly beneficial for projects requiring continuous air supply.

The 91959 also boasts a user-friendly design. It comes equipped with wheels and a handle, making it easy to transport around the job site or within a garage. This mobility is further enhanced by its compact vertical design, which saves space while still providing a significant air storage capacity.

In terms of technology, the Harbor Freight Tools 91959 features an oil-free pump. This characteristic ensures that maintenance is minimal, as it eliminates the need for regular oil changes. The oil-free operation also contributes to cleaner air output, making it a suitable choice for applications where clean air is crucial.

Another noteworthy aspect of the 91959 is its noise level. Operating at 68 decibels, it is relatively quiet compared to many other air compressors on the market, allowing for a more pleasant working environment without disturbing others nearby.

Safety features such as a thermal overload protector and a pressure relief valve are also included, promoting user safety during operation. These features help prevent overheating and excessive pressure buildup, ensuring a secure and reliable working experience.

In summary, the Harbor Freight Tools 91959 is a powerful, portable, and user-friendly air compressor that meets a variety of needs across multiple applications. With its impressive features, durable construction, and low-maintenance design, it stands as a valuable investment for anyone looking to enhance their toolbox with a reliable air compression solution.
Top Page Image Contents