Harbor Freight Tools 96156 manual Save This Manual, Installation precautions

Page 3

Save This Manual

Keep this manual for the safety warnings and precautions, installation, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

Important SAFETY

Information

In this manual, on the labeling, and all other information provided with this product:

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

DANGER indicates a hazardous situation which, if not avoided, will result

in death or serious injury.

WARNING indicates a hazardous situation

which, if not avoided, could result in death or serious injury.

CAUTION, used with the safety alert

symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE is used to address practices not

related to personal injury.

CAUTION, without the safety alert symbol, is

used to address practices not related to personal injury.

WARNING! Read all instructions. Failure to follow all instructions listed below may result in fire, serious injury and/or DEATH. The

warnings and precautions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

SAVE THESE INSTRUCTIONS

Installation precautions

1.Gasoline fuel and fumes are flammable, and potentially explosive. Use proper fuel storage and handling procedures.

Do not store fuel or other flammable materials nearby.

2.Have multiple ABC class fire extinguishers nearby.

3.Operation of this engine may create sparks that can start fires around dry vegetation.

A spark arrestor may be required.

The operator should contact local fire agencies for laws or regulations relating to fire prevention requirements.

4.Install only to a lawn mower and only in an upright position.

5.Wear ANSI-approved safety goggles, heavy-duty work gloves, and dust mask/ respirator during installation.

6.Use only oil and fuel recommended in the “Specifications” section of this manual.

SKU 96156

For technical questions, please call 1-800-444-3353.

Page 3

Image 3
Contents Distributed exclusively by Harbor Freight Tools For technical questions or replacement parts, please callContents Save This Manual Installation precautionsCarbon Monoxide Hazard Using an engine indoors Operating precautionsService precautions Specifications InstallationUnpacking Make sure the hardware does not contact moving parts See Figure aStarting the Engine Operating InstructionsTo shut off the engine, release the mower’s brake handle Break-in Period SKU For technical questions, please call Maintenance ProceduresAir Filter Element Maintenance ServicingCleaning, Maintenance, Lubrication Schedule After Initial 20 Operation Hour PeriodEvery 25 Operation Hours Thereafter Storage Engine will not start TroubleshootingEngine knocks Problem Possible Causes Probable Solutions Engine misfiresEngine stops SuddenlyPart Description ’ty Parts ListAssembly Diagram Please Read the Following Carefully Emission Control System WarrantyOwner’s Warranty Responsibilities
Related manuals
Manual 19 pages 57.78 Kb