Harbor Freight Tools 95964 Chipper/shredder operation, Spark Plug, Before Starting

Page 10

6.Reinstall the Air Cleaner, making sure that the gasket is in place.

Spark Plug

Recommended spark plugs: BPR6ES (NGK®), W20EPR-U (Denso®), or equivalent.

1.To check the spark plug. Disconnect the spark plug cap and remove the spark plug with a 13/16” spark plug wrench.

2.Inspect the spark plug, if electrodes are worn or insulator is chipped or cracked, replace the spark plug.

3.The gauge for the spark plug gap should be set to 0.028-0.031”.

4.Install the spark plug with a 13/16” spark plug wrench and connect spark plug cap.

Chipper/shredder operation

Before Starting

1.Use safety equipment. Always wear ANSI approved safety impact goggles and hearing protection, heavy duty work gloves, and a dust mask or respirator when using this product.

2.Check underneath the Chipper/Shredder to make sure there are no spots that would indicate an oil or gas leak. If there are any leaks, do not use the Chipper/

Shredder and contact a qualified repair professional for maintenance.

3.Inspect the condition of the Chipper/Shredder. Ensure that all shields and covers are in place. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, and any other condition that may affect the safe operation of the machine. If abnormal noise or vibration occurs, have the problem corrected before further use. Do not use damaged equipment. Place on a flat, level surface.

4.Check the oil level. Never run the Engine with low or no engine oil. Running the engine with low or no oil will permanently damage the Engine.

Starting Engine

1.Move the Fuel Valve lever to the “ON” position.

2.To start a cold engine, move the Choke lever to the “CLOSED” position. If the en- gine is already warmed up, leave the Choke lever in the “OPEN” position.

3.Move the Throttle lever about 1/3 of the way toward the “FAST” position.

4.Turn the On/Off Switch to the “ON” position.

5.Take hold of the Starter Recoil Grip firmly and pull slowly until there is resistance, then pull briskly to start engine. Repeat as necessary.

SKU 95964

For technical questions, please call 1-800-444-3353.

Page 10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents For technical questions or replacement parts, please call Hp chipper/shredderSave This Manual SpecificationsFor technical questions, please call General safety warnings Specific Safety Rules and Precautions Fire and Explosion Precautions Chemical Precautions Mechanical PrecautionsUse only Engine manufacturer recommended fuel and oil Engine instructions Noise PrecautionsUnpacking Before starting the EngineFilling Engine Oil Oil InstructionsFuel Instructions To Change OilFilling the Fuel Air FilterDraining The Fuel Tank and Carburetor Before Starting Chipper/shredder operationSpark Plug Starting EngineShredding and Chipping INSPECTION, MAINTENANCE, and CleaningSKU For technical questions, please call Maintenance schedule Troubleshooting Please Read the Following CarefullySchematic assembly diagram Chipper/Shredder parts list Part Description QtyChipper/shredder assembly diagram Engine parts list Part Description QtyEngine Assembly Length of Coverage Owner’s Warranty ResponsibilitiesNo Charge Repair or Replacement Consequential Damages CoverageRecord Product’s Serial Number Here Service and MaintenanceWarranted Parts Limited 90 DAY Warranty

95964 specifications

Harbor Freight Tools is well-known for offering a wide range of high-quality tools at competitive prices. One of the standout products in their lineup is the Harbor Freight Tools 95964, an exceptional 12-inch band saw that has garnered attention among both amateur and professional woodworkers. This versatile power tool combines functionality, reliability, and innovation, making it a great addition to any workshop.

One of the key features of the Harbor Freight Tools 95964 is its powerful motor, which delivers a robust performance for cutting through various materials. The motor is rated at 1/3 horsepower, providing ample power for even the most demanding cutting tasks. This ensures smooth and consistent cuts, whether you're working with softwoods, hardwoods, or even some types of metal.

The band saw is equipped with a 12-inch throat capacity, allowing users to tackle larger workpieces with ease. This spacious cutting area makes it perfect for creating intricate designs or handling extensive projects that require precision cutting. Additionally, the saw features a table that can be easily adjusted for angle cuts, providing further versatility for various applications.

Another noteworthy characteristic of the Harbor Freight Tools 95964 is its user-friendly design. The tool is built with a lightweight and compact structure, making it easy to transport and maneuver. The adjustable blade tension mechanism allows for quick blade changes and ensures optimal cutting performance. Users will also appreciate the saw's built-in LED work light, which illuminates the cutting area for better visibility, especially during detailed work.

Safety is a priority for Harbor Freight, and the 95964 band saw includes several safety features to protect users. It comes with a blade guard that helps prevent accidental contact with the blade while in operation. The onboard safety switch ensures that the saw can only be activated when required, reducing the risk of unintended starts.

In summary, the Harbor Freight Tools 95964 band saw is a remarkable tool that combines power, precision, and safety in an accessible package. Its strong motor, spacious throat capacity, and user-friendly design make it an ideal choice for woodworkers of all skill levels. With its emphasis on quality and affordability, Harbor Freight continues to be a trusted name in the tool industry, and the 95964 is a testament to their commitment to excellence. Whether you’re a hobbyist or a seasoned professional, this band saw is sure to enhance your woodworking experience.
Top Page Image Contents