Harbor Freight Tools 95964 Owner’s Warranty Responsibilities, Length of Coverage

Page 19

Emission Control System Warranty

California and United States Emission Control Defects Warranty Statement

The California Air Resources Board (herein CARB), the United States Environmental Protection Agency (herein EPA), and Harbor Freight Tools® (herein HFT) are pleased to explain the emission control system warranty on your 1995 and later Small Off-Road Engine (herein engine). In California, the engine must be designed, built and equipped to meet the State’s stringent anti-smog standards. Elsewhere within the United States, new off-road, spark-ignition engines certified for model year 1997 and later, must meet similar standards set forth by the EPA. HFT must warrant the emission control system on your engine for the periods of time described below, provided there has been no abuse, neglect or improper maintenance of your engine.

Your emission control system may include parts such as the carburetor or fuel-injection system, and the ignition system. Also included may be hoses, belts, connectors and other emission-related assemblies.

Where a warrantable condition exists, HFT will repair your engine at no cost to you including diagnosis, parts and labor.

Manufacturer’s Warranty Coverage

The 1995 and later engines are warranted for two (2) years. If any emission-related part on your engine is defective, the part will be repaired or replaced by HFT.

Harbor Freight Tools Emission Control Defects Warranty Coverage

Engines are warranted for a period of two (2) years relative to emission control parts defects, subject to the provisions set forth below. If any emission related part on your engine is defective, the part will be repaired or replaced by HFT.

Owner’s Warranty Responsibilities

-As the engine owner, you are responsible for the performance of the required maintenance listed in your Owner’s Manual. HFT recommends that you retain all receipts covering maintenance on your engine, but HFT cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance.

-As the engine owner, you should, however, be aware that HFT may deny you warranty coverage if your engine or a part has failed due to abuse, neglect, improper maintenance, or unapproved modifications.

-You are responsible for shipping your engine to a HFT warranty station as soon as a problem exists. Contact the HFT Customer Service department at the number below to make shipping arrangements. The warranty repairs should be completed in a reason- able amount of time, not to exceed 30 days.

If you have any questions regarding your warranty rights and responsibilities, you should contact the Harbor Freight Tools Customer Service Department at 1-800-444-3353.

Harbor Freight Tools Emission Control Defects Warranty Provisions

1.Length of Coverage

HFT warrants to a first retail purchaser and each subsequent purchaser that the engine is free from defects in materials and workmanship that cause the failure of warranted parts for a period of two (2) years after the date of delivery to the first retail

purchaser.

2.No Charge Repair or Replacement

Repair or replacement of any warranted part will be performed at no charge to the owner if the work is performed through a warranty

station authorized by HFT. For emissions warranty service, contact the HFT Customer Service Department at 1-800-444-3353.

3.Consequential Damages Coverage

Coverage under this warranty shall also extend to the failure of any engine components caused by the failure of any warranted part while it is still covered under this warranty.

4.Coverage Exclusions

Warranty claims shall be filed in accordance with the provisions of the HFT warranty policy explained in the box at the top of the previous page. HFT shall not be liable for any loss of use of the engine, for any alternative usage, for any damage to goods, loss of time, or inconvenience. Warranty coverage shall also be excluded for any part which fails, malfunctions, or is damaged due to failure to follow the maintenance and operating instructions set forth in the Owner’s Manual including, but not limited to:

(a)use of parts which are not authorized by HFT

(b)improper installation, adjustment or repair of the engine or of any warranted part unless performed by an authorized warranty center

(c)failure to follow recommendations on fuel use contained in the Owner’s Manual

(d)improper or inadequate maintenance of any warranted parts

(e)repairs performed outside of the authorized warranty service dealers

SKU 95964

For technical questions, please call 1-800-444-3353.

Page 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Hp chipper/shredder For technical questions or replacement parts, please callSave This Manual SpecificationsFor technical questions, please call General safety warnings Specific Safety Rules and Precautions Fire and Explosion Precautions Chemical Precautions Mechanical PrecautionsUse only Engine manufacturer recommended fuel and oil Before starting the Engine Noise PrecautionsUnpacking Engine instructionsTo Change Oil Oil InstructionsFuel Instructions Filling Engine OilFilling the Fuel Air FilterDraining The Fuel Tank and Carburetor Starting Engine Chipper/shredder operationSpark Plug Before StartingShredding and Chipping INSPECTION, MAINTENANCE, and CleaningSKU For technical questions, please call Maintenance schedule Please Read the Following Carefully TroubleshootingSchematic assembly diagram Part Description Qty Chipper/Shredder parts listChipper/shredder assembly diagram Part Description Qty Engine parts listEngine Assembly Consequential Damages Coverage Owner’s Warranty ResponsibilitiesNo Charge Repair or Replacement Length of CoverageRecord Product’s Serial Number Here Service and MaintenanceWarranted Parts Limited 90 DAY Warranty

95964 specifications

Harbor Freight Tools is well-known for offering a wide range of high-quality tools at competitive prices. One of the standout products in their lineup is the Harbor Freight Tools 95964, an exceptional 12-inch band saw that has garnered attention among both amateur and professional woodworkers. This versatile power tool combines functionality, reliability, and innovation, making it a great addition to any workshop.

One of the key features of the Harbor Freight Tools 95964 is its powerful motor, which delivers a robust performance for cutting through various materials. The motor is rated at 1/3 horsepower, providing ample power for even the most demanding cutting tasks. This ensures smooth and consistent cuts, whether you're working with softwoods, hardwoods, or even some types of metal.

The band saw is equipped with a 12-inch throat capacity, allowing users to tackle larger workpieces with ease. This spacious cutting area makes it perfect for creating intricate designs or handling extensive projects that require precision cutting. Additionally, the saw features a table that can be easily adjusted for angle cuts, providing further versatility for various applications.

Another noteworthy characteristic of the Harbor Freight Tools 95964 is its user-friendly design. The tool is built with a lightweight and compact structure, making it easy to transport and maneuver. The adjustable blade tension mechanism allows for quick blade changes and ensures optimal cutting performance. Users will also appreciate the saw's built-in LED work light, which illuminates the cutting area for better visibility, especially during detailed work.

Safety is a priority for Harbor Freight, and the 95964 band saw includes several safety features to protect users. It comes with a blade guard that helps prevent accidental contact with the blade while in operation. The onboard safety switch ensures that the saw can only be activated when required, reducing the risk of unintended starts.

In summary, the Harbor Freight Tools 95964 band saw is a remarkable tool that combines power, precision, and safety in an accessible package. Its strong motor, spacious throat capacity, and user-friendly design make it an ideal choice for woodworkers of all skill levels. With its emphasis on quality and affordability, Harbor Freight continues to be a trusted name in the tool industry, and the 95964 is a testament to their commitment to excellence. Whether you’re a hobbyist or a seasoned professional, this band saw is sure to enhance your woodworking experience.
Top Page Image Contents