nails, spikes, stones, etc.
15.
WARNING! Ladders are inherently dangerous equipment to use. If you are using a ladder, make sure to read and adhere to the safety warnings and instruc- tions as recommended by the manufacturer/distributor of the ladder you are using.
16.
WARNING! The warnings and cautions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be under- stood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
17.
WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities, contain chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from
(California Health & Safety Code 25249.5, et seq.)
UNPACKING
When unpacking, check to make sure all the parts shown in the Parts List on page 8 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the front cover of this manual as soon as possible.
OPERATING INSTRUCTIONS
1.Always wear eye protection. Wear ANSI approved safety impact goggles when using this product.
Always wear hand protection. Saw teeth are extremely sharp. Handle
2.with extreme care, and always wear heavy duty work gloves. In addition, wear an ANSI approved hard hat and steel toe boots for additional protec- tion.
3.Check to make sure there are no children, adults, or animals in the area.
4.Place the Chain (6) around the tree limb to be cut. Make sure there are no kinks in the Chain and that the chain links are not doubled up.
(See Figure A, next page.)
5.Decide what tree limb you want to cut, and plan where you want to stand so you are clear of falling limbs.
SKU 94979 For technical questions, please call