Cable Clamps (39) and Cord Clamp (9) not shown
Lower Handle (31B)
Cutter Housing (13)
Screws (35)
|
| Upper Handle (37) |
Knob (34) | ||
Screws (35)
Lower Handle (31A)
Grass Basket (19)
and Screws (20)
Screws (23)
Assembly
1.Insert the Lower Handle (31B) into the hole on the right side of the Cutter Housing (13), and the Lower Handle (31A) into the hole on the left side. Tighten both Screws (23) that hold the Lower Handles in place. See photo above.
2.Attach the Upper Handle (37) to the Lower Handles (31 A and B) using Knob (34) and Screw (35). Tighten both Knobs securely.
3.To attach the Grass Basket (19), lift the Discharge Cover (30) and place the two “L” Bars on the Grass Basket (19) over the tabs on the Cutter Housing (13). Then, release the Discharge Cover (30). See photos above and below.
L
Bars
Discharge Cover (30)
Tabs
Operation
Set Cutting Height
Caution: Always disconnect the power cord from the lawnmower before making adjust- ments.
SKU 47336 | Page 5 |