Harbor Freight Tools 47336 manual Cutting Blade Removal

Page 7

2.Periodically check all nuts, bolts, and screws for tightness, especially the Blade bolt.

3.Store the Lawnmower in a clean, dry location.

4.Periodically lubricate the axles and wheels with a light oil.

Cutting Blade Removal

1.To remove and refit the Blade (17), turn the Lawnmower over to reveal the Blade and Impeller (16).

2.Hold the Blade with a gloved hand. With the other hand, remove the Blade securing bolt and washer using a suitable spanner wrench.

3.Remove the Blade. If sharpening is needed, it should be done by a qualified technician.

4.To replace the Blade, align the two Blade holes onto the two lugs on the bottom of the Impeller. Replace the washer and bolt with the spanner wrench. Securely tighten.

Locating Holes

Lugs

Bolt and Washer

SKU 47336

Page 7

Image 7
Contents 12’’ Electric Lawn Mower Save This Manual SpecificationsSafety Warnings and Precautions Read all instructions before using this product and toolsPage Unpacking Additional Lawnmower Safety PrecautionsOperation AssemblySet Cutting Height General MaintenanceConnecting the Power Cord Turning on the LawnmowerCutting Blade Removal Parts List Assembly Diagram Limited 90 DAY Warranty