Harbor Freight Tools 92455 Generator Support and Mounting, Grounding the Generator

Page 11

5.Place the Generator as close as possible to the electrical tools and equipment being powered to reduce the length of extension cords.

6.If the Generator in located indoors the Engine exhaust must be ventilated to the outdoors using leakproof, heat resistant, flexible, metal, flex tubing.

GENERATOR SUPPORT AND MOUNTING

1.Mount the Generator on a concrete slab capable of supporting the weight of the Generator. The slab must extend on all sides beyond the Frame (41) by at least one foot. Contact a cement contractor for slab specifications if necessary. Attach the Frame to the concrete slab using 3/8” diameter expansion anchor bolts (not supplied).

GROUNDING THE GENERATOR

1.NOTE: It is recommended that only a trained and licensed electrician perform this procedure.

2.Connect a #6 AWG grounding wire (not included) from the Ground Connector (8) on the Generator to a grounding rod (not included) that has been driven at least 24 inches deep into the earth. The grounding rod must be an earth-driven cop- per or brass rod (electrode) which can adequately ground the Generator.

(See Figure B, next page.)

OPERATING INSTRUCTIONS

NOTE: For additional references to the parts listed in the following pages, refer to the

Assembly Diagrams on pages 19 and 21.

Pre-Start Checks:

1.Check to make sure the Engine’s Power Switch (2) is in its “OFF” position.

(See Figure B, next page.)

2.IMPORTANT ! Prior to first using the Generator, the Engine MUST be filled with approximately 3/4 (0.63) quart of a high quality SAE 10W-30 grade engine oil. To do so, unscrew and remove the Engine’s Oil Dipstick (65A) lo- cated at the bottom of the Engine Crankcase. Fill the Engine’s Crankcase until the oil level is level with the upper marked line on the Dipstick. Then, screw the Dipstick back into the Oil Fill Hole. (See Figure C, next page.)

SKU 92455

For technical questions, please call 1-800-444-3353.

Page 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Generator SET For technical questions and replacement parts, please callSKU For technical questions, please call Product SpecificationsSave this Manual Work Area General Safety RulesElectrical Safety UnpackingPersonal Safety Generator USE and Care ServiceHeart Pacemaker Precaution Installation Precautions Specific Product Warnings and PrecautionsFire and Explosion Precautions Chemical Precautions Mechanical PrecautionsElectrical Precautions Noise PrecautionsGeneral Location InstallationOperating Instructions Assembly Diagrams on pages 19Generator Support and Mounting Grounding the GeneratorFigure B REV 03/06 SKU For technical questions, please call Figure DSee Figure G Figure FSee Figure H, next Powering 120 Volt AC Tools And EquipmentFigure H See Figure HDo not use damaged equipment INSPECTION, CLEANING, and MaintenancePlease Read the Following Carefully Parts ListAssembly Diagram Parts List 73A 72A 71A 77A 76A 70A 69A 75A 74A Wiring Diagram Emission Control System Warranty Length of Coverage

92455 specifications

Harbor Freight Tools, a reputable provider of quality tools and equipment at an affordable price, offers the 92455 Air Compressor, a popular choice among both DIY enthusiasts and professionals. This versatile machine is designed to handle various tasks, making it an essential addition to any garage or workshop.

One of the main features of the Harbor Freight Tools 92455 is its powerful 4-gallon capacity tank, which allows for extended use before requiring a refill. This sizeable tank combined with the unit's maximum pressure of 125 PSI provides ample power for a variety of air-driven tools, like nailers, spray guns, and inflation tools. The compressor is built with a reliable oil-free pump, eliminating the need for constant maintenance while ensuring a clean and efficient operation. This feature is particularly appealing, as it allows users to focus on their projects without frequently stopping to maintain the unit.

The 92455 is designed for portability. Its lightweight build, along with equipped handles and rubber tires, makes it easy to transport from one location to another. Whether you're working on a home renovation project, automotive repair, or woodworking, the ability to easily move the compressor can save both time and effort.

In terms of technology, the Harbor Freight Tools 92455 integrates a quick-connect coupler, allowing users to easily switch between different air tools without fumbling with threads or fittings. This feature enhances user productivity, as it minimizes downtime when changing tools. Additionally, the unit operates quietly, making it suitable for indoor use without annoying noise, whether in a residential garage or a professional workshop.

Durability is another key characteristic of the 92455. It is constructed with high-quality materials to withstand rigorous use over time, providing users with a reliable and long-lasting air compressor. The unit also features a built-in pressure gauge that allows users to easily monitor the air pressure, ensuring optimal operation of connected tools.

In conclusion, the Harbor Freight Tools 92455 Air Compressor offers essential features, durable construction, and user-friendly technologies, making it an excellent choice for anyone in need of a practical and efficient air compressor. Whether you’re tackling small jobs or larger projects, this compressor is sure to meet expectations and provide reliable performance for years to come.
Top Page Image Contents