Harbor Freight Tools 91523 manual Installation, General Location

Page 10

8.Keep all electrical equipment clean and dry. Replace any wiring where the insu- lation is cracked, cut, abraded or otherwise degraded. Replace terminals that are worn, discolored, or corroded. Keep terminals clean and tight.

9.Insulate all connections and disconnected wires.

10.Guard against electric shock. Prevent body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerator enclosures.

INSTALLATION

1.NOTE: Prior to powering tools and equipment, make sure the Generator’s rated voltage, wattage, and amperage capacity (115V - 20AMPs) is adequate to supply all electrical loads that the unit will power. If powering exceeds the Generator’s capacity, it may be necessary to group one or more of the tools and/or equipment for connection to a separate Generator.

2.Electrical and other permits may be required for the installation of emergency power systems. Investigate the local building and electrical codes before install- ing this unit. Installation must be completed by licensed contractors.

3. WARNING! The Generator weighs approximately 112 pounds. Use care and the proper lifting or hoisting equipment when moving it to the installation location. Always connect hoist lines to the Frame (41) of the Generator.

GENERAL LOCATION

1.It is recommended to locate and install the Generator outdoors where cooling air is readily available.

2.Install the Generator so that the air inlets and outlets are not blocked by obstruc- tions such as bushes, trees, or snow drifts. Locating it in the path of heavy winds or snowdrifts may require the placement of a barrier for protection. The air inlet, in normal weather conditions, should face the prevailing wind direction.

3.Install the Generator on a concrete slab or other area where rain drainage or flood waters can not reach it.

4.Generator placement should allow four feet of access to all sides for mainte- nance.

SKU 91523

PAGE 10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Generator SET For technical questions, please callSave this Manual Product SpecificationsUnpacking Work Area General Safety RulesElectrical Safety Read and Understand ALL InstructionsPersonal Safety Service Generator USE and CareSpecific Product Warnings and Precautions Heart Pacemaker Precaution Installation PrecautionsFire and Explosion Precautions Mechanical Precautions Chemical PrecautionsElectrical Precautions Noise PrecautionsRequired Minimum Extension Cord Gauge 120 Volt Installation General LocationGrounding the Generator Assembly Diagrams on pages 19Generator Support and Mounting Operating InstructionsFigure B To Start The Engine Figure F See Figure GPowering 120 Volt AC Tools And Equipment See Figure H, nextSee Figure H Figure HPlease Read the Following Carefully INSPECTION, CLEANING, and MaintenanceDo not use damaged equipment Parts List Description QtyPage Parts List a Assembly Diagram a

91523 specifications

Harbor Freight Tools 91523 is a versatile and reliable tool designed to meet various needs for both DIY enthusiasts and professional users. With its robust build and advanced features, this tool stands out as a must-have for anyone looking to enhance their workshop efficiency.

One of the key features of the Harbor Freight Tools 91523 is its powerful motor, which delivers consistent performance across a range of applications. The tool is engineered to handle heavy-duty tasks with ease, making it suitable for both light and intensive use. This means users can count on reliable operation, whether they are working on repair jobs or undertaking complex projects.

The 91523 also showcases an ergonomic design that prioritizes user comfort. The handle is constructed to provide a secure grip, reducing fatigue during extended use. This is particularly beneficial for professionals who spend long hours working with tools, as comfort plays a crucial role in maintaining productivity.

Featuring advanced safety technologies, the Harbor Freight Tools 91523 ensures user protection while operating. It comes with built-in safety features such as automatic shut-off mechanisms that prevent overheating and other potential hazards. These safety measures provide peace of mind, allowing users to focus on their work without worrying about equipment malfunctions.

Additionally, the tool is equipped with versatile functionality. It can be used for a wide range of applications, from cutting and sanding to shaping and grinding. This adaptability makes it an essential tool for various trades, including carpentry, plumbing, and electrical work. Users can count on the 91523 to deliver precise results, regardless of the task at hand.

The durability of the Harbor Freight Tools 91523 is another standout characteristic. Built from high-quality materials, the tool is designed to withstand the rigors of regular use without sacrificing performance. This durability ensures that users can rely on the 91523 for years to come, making it a smart investment for any toolkit.

In conclusion, Harbor Freight Tools 91523 combines power, comfort, safety, versatility, and durability in one tool. Its impressive features and technologies position it as an ideal choice for both seasoned professionals and weekend warriors alike. Whether for simple home repairs or more complex projects, the 91523 is poised to deliver the performance and reliability that users demand in their tools.
Top Page Image Contents