Harbor Freight Tools 91523 manual Generator Support and Mounting, Grounding the Generator

Page 11

5.Place the Generator as close as possible to the electrical tools and equipment being powered to reduce the length of extension cords.

6.If the Generator in located indoors the Engine exhaust must be ventilated to the outdoors using leak-proof, heat resistant, flexible, metal, flex tubing.

GENERATOR SUPPORT AND MOUNTING

1.Mount the Generator on a concrete slab capable of supporting the weight of the Generator. The slab must extend on all sides beyond the Frame (41) by at least one foot. Contact a cement contractor for slab specifications if necessary. Attach the Frame to the concrete slab using 3/8” diameter expansion anchor bolts (not supplied).

GROUNDING THE GENERATOR

1.NOTE: It is recommended that only a trained and licensed electrician perform this procedure.

2.Connect a #6 AWG grounding wire (not included) from the Ground Connector (8) on the Generator to a grounding rod (not included) that has been driven at least 24 inches deep into the earth. The grounding rod must be an earth-driven cop- per or brass rod (electrode) which can adequately ground the Generator.

(See Figure B, next page.)

OPERATING INSTRUCTIONS

NOTE: For additional references to the parts listed in the following pages, refer to the

Assembly Diagrams on pages 19 and 21.

Pre-Start Checks:

1.Check to make sure the Engine Power Switch (2) is in its “OFF” position.

(See Figure B, next page.)

2.IMPORTANT! Prior to first using the Generator, the Engine MUST be filled with approximately 3/4 (0.63) quart of a high quality SAE 10W-30 grade engine oil. To do so, unscrew and remove the Engine’s Oil Dipstick (65A) located at the bottom of the Engine Crankcase. Fill the Engine’s Crankcase until the oil level is level with the upper marked line on the Dipstick. Then, screw the Dip- stick back into the Oil Fill Hole. (See Figure C, next page.)

SKU 91523

PAGE 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents For technical questions, please call Generator SETUnpacking Product SpecificationsSave this Manual Read and Understand ALL Instructions General Safety RulesElectrical Safety Work AreaPersonal Safety Generator USE and Care ServiceHeart Pacemaker Precaution Installation Precautions Specific Product Warnings and PrecautionsFire and Explosion Precautions Chemical Precautions Mechanical PrecautionsRequired Minimum Extension Cord Gauge 120 Volt Noise PrecautionsElectrical Precautions General Location InstallationOperating Instructions Assembly Diagrams on pages 19Generator Support and Mounting Grounding the GeneratorFigure B To Start The Engine See Figure G Figure FSee Figure H, next Powering 120 Volt AC Tools And EquipmentFigure H See Figure HDo not use damaged equipment INSPECTION, CLEANING, and MaintenancePlease Read the Following Carefully Description Qty Parts ListPage Parts List a Assembly Diagram a

91523 specifications

Harbor Freight Tools 91523 is a versatile and reliable tool designed to meet various needs for both DIY enthusiasts and professional users. With its robust build and advanced features, this tool stands out as a must-have for anyone looking to enhance their workshop efficiency.

One of the key features of the Harbor Freight Tools 91523 is its powerful motor, which delivers consistent performance across a range of applications. The tool is engineered to handle heavy-duty tasks with ease, making it suitable for both light and intensive use. This means users can count on reliable operation, whether they are working on repair jobs or undertaking complex projects.

The 91523 also showcases an ergonomic design that prioritizes user comfort. The handle is constructed to provide a secure grip, reducing fatigue during extended use. This is particularly beneficial for professionals who spend long hours working with tools, as comfort plays a crucial role in maintaining productivity.

Featuring advanced safety technologies, the Harbor Freight Tools 91523 ensures user protection while operating. It comes with built-in safety features such as automatic shut-off mechanisms that prevent overheating and other potential hazards. These safety measures provide peace of mind, allowing users to focus on their work without worrying about equipment malfunctions.

Additionally, the tool is equipped with versatile functionality. It can be used for a wide range of applications, from cutting and sanding to shaping and grinding. This adaptability makes it an essential tool for various trades, including carpentry, plumbing, and electrical work. Users can count on the 91523 to deliver precise results, regardless of the task at hand.

The durability of the Harbor Freight Tools 91523 is another standout characteristic. Built from high-quality materials, the tool is designed to withstand the rigors of regular use without sacrificing performance. This durability ensures that users can rely on the 91523 for years to come, making it a smart investment for any toolkit.

In conclusion, Harbor Freight Tools 91523 combines power, comfort, safety, versatility, and durability in one tool. Its impressive features and technologies position it as an ideal choice for both seasoned professionals and weekend warriors alike. Whether for simple home repairs or more complex projects, the 91523 is poised to deliver the performance and reliability that users demand in their tools.
Top Page Image Contents